Valid

HG/T 3041-2023Rubber hoses and hose assemblies for fuel delivery by tank truck (English PDF)

油槽车输送燃油用橡胶软管和软管组合件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3041-2023 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 28, 2023

Implementation date

February 1, 2024

Scope

HG/T 3041-2023 is the English-translated version of 油槽车输送燃油用橡胶软管和软管组合件.

HG/T 3041-2023 is the Chinese standard "Rubber hoses and hose assemblies for fuel delivery by tank truck". Its scope clause reads: This standard specifies the requirements for two sets of rubber hoses and hose assemblies with a maximum working pressure of 1.0 MPa for loading and unloading liquid hydrocarbon fuels.

Both sets of hoses are designed for use with hydrocarbon fuels containing up to 50% aromatics by volume and up to 15% oxygenates by volume.

Found what you need?

Document preview — HG/T 3041-2023

National Standard of the People's Republic of China

Replacing
HG/T 3041-2009

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope

1 Scope

This standard specifies the requirements for two sets of rubber hoses and hose assemblies with a maximum working pressure of 1.0 MPa for loading and unloading liquid hydrocarbon fuels.

Both sets of hoses are designed for use with hydrocarbon fuels containing up to 50% aromatics by volume and up to 15% oxygenates by volume.

Relation to the international standard

This document is identical to ISO 2929:2021, Rubber hoses and hose assemblies for fuel delivery by tank truck.

It was drafted in accordance with GB/T 1.1-2020, Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents.

One editorial change was made with respect to the international standard: the unit "bar" was removed from the body of the text and only "MPa" is used.

Changes from the previous edition

This document replaces HG/T 3041-2009, Rubber hoses and hose assemblies for fuel delivery by tank truck. Apart from structural and editorial changes, the main technical changes with respect to HG/T 3041-2009 are the following.

The test method for "deformation of the hose outside diameter at the minimum bend radius under an internal pressure of 0.07 MPa" is now ISO 10619-1, which replaces the withdrawn ISO 1746 (see Table 3; Table 3 of the 2009 edition).

The subject of "type testing" has been added (see Clause 9 and Annex E).

Attention is drawn to the possibility that some of the content of this document may be the subject of patent rights; the issuing body is not responsible for identifying such patents.

Edition history

The standard was first issued in 1989 as HG/T 3041-1989, revised for the first time in 1999 and for the second time in 2009. The 2023 edition is the third revision.

The document was proposed by the China Petroleum and Chemical Industry Federation and is under the jurisdiction of the Hose Subcommittee of the National Technical Committee on Rubber and Rubber Products of Standardization Administration (SAC/TC35/SC1).

Foreword

This document was issued on 28 July 2023 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 February 2024.

It replaces HG/T 3041-2009.

About this edition

HG/T 3041-2023 is the current edition. It was issued on 28 July 2023 and has been in force since 1 February 2024, replacing HG/T 3041-2009.

HG/T 3041-2009 has been superseded: a specification that still cites it is citing a withdrawn edition.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.

Edition history and citation

HG/T 3041-2023 replaces HG/T 3041-2009. A specification, drawing or test report that cites the older number is pointing at a document that is no longer the one in force, and the two editions can differ in requirements, in test methods or in scope.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

HG/T 3041-2023 carries no ICS number in the official record.

The HG/T prefix marks a recommended standard of China's chemical industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

How this standard is designated

The full designation is HG/T 3041-2023. A citation should carry the number with its year, because the year identifies the text that applies.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of HG/T 3041

EditionTitleRevisionStatus
HG/T 3041-2023Rubber hoses and hose assemblies for fuel delivery by tank truckcurrent editionCurrent
HG/T 3041-2009Rubber hoses and hose assemblies for fuel delivery by tank truckprevious editionSuperseded

This page sells the current edition, HG/T 3041-2023. Earlier editions are listed for reference only.

How to Download HG/T 3041-2023

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3041-2023

$270.00