GB/T 32476-2016Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing system (English PDF)
具有油气回收功能的计量分配燃油用橡胶和塑料软管及软管组合件
This is a limited preview
Buy now to download the full PDF (24 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32476-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
February 24, 2016
Implementation date
September 1, 2016
Scope
GB/T 32476-2016 is the English-translated version of 具有油气回收功能的计量分配燃油用橡胶和塑料软管及软管组合件.
GB/T 32476-2016 is the Chinese standard "Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing system".
Its scope clause reads: This standard specifies the metered dispensing of fuel having a vapor recovery function used in gas stations and terms and definitions with a rubber hose and plastic hose assemblies, materials and structure, classification, requirements, test frequency and symbol.
This standard applies to conventional temperature rating -30 °C ~ + 55 °C and between -40 °C ~ + 55 °C low temperature level between the working pressure is less than 1.6MPa have vapor recovery function metered dispensing fuel (including oxygenated not more than 15% of the compound oxide fuel) rubber and plastic hoses and hose assemblies.
This standard does not apply to multi-cavity fuel dispensing hose. Its clauses include terms and definitions; materials and structures.
Found what you need?
Document preview — GB/T 32476-2016
National Standard of the People's Republic of China
- ICS
- 75.200
- Classification
- G 42
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Materials and Structures
1 Scope
This standard specifies the metered dispensing of fuel having a vapor recovery function used in gas stations and terms and definitions with a rubber hose and plastic hose assemblies, materials and structure, classification, requirements, test frequency and symbol.
This standard applies to conventional temperature rating -30 °C ~ + 55 °C and between -40 °C ~ + 55 °C low temperature level between the working pressure is less than 1.6MPa have vapor recovery function metered dispensing fuel (including oxygenated not more than 15% of the compound oxide fuel) rubber and plastic hoses and hose assemblies.
This standard does not apply to multi-cavity fuel dispensing hose.
2 Normative references
The following documents for the application of this document is essential. For cited documents with dates, only the dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 528 Determination of vulcanized rubber or thermoplastic rubber tensile stress-strain properties
1040.1 Plastics Determination of tensile properties GB/T Part 1. General
GB/T 1690 vulcanized rubber or thermoplastic rubber Test method for resistance to liquids
GB/T 3512 vulcanized rubber or thermoplastic rubber hot air and heat accelerated aging test
GB/T 5563 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
GB/T 5565-2006 rubber or plastic hose reinforced and non-reinforced hose bending test
Determination of GB/T 7129 rubber or plastic hose volume expansion
GB/T 7528 Rubber and plastics hoses and hose assemblies term
GB/T 9572-2013 Rubber and plastic hoses and hose assemblies resistance and conductivity measurement
GB/T 9573 Rubber and plastics hoses and hose assemblies hose size and hose assemblies length measurement method
GB/T 9575 Rubber and plastics hoses and hose specifications maximum and minimum diameter and cut length tolerance
GB/T 9867-2008 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance (abrasion rotating cylindrical drum machine method)
GB/T 14905 Determination of strength between adhesive layers of rubber and plastic hoses
GB/T 24134 resistance under static conditions Rubber and plastics hoses ozone Performance Evaluation
ISO 554 regulation and/or testing standard atmospheric Specification
3 Terms and Definitions
GB/T 7528 defined the terms and definitions apply to this document.
4 Materials and Structures
4.1 Hose
Fuel delivery hose from the fuel hose and recovery of oil and gas hoses for oil and gas, oil hose placed in the fuel hose.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 22380.2-2019Explosion protected safety technique of the petrol filling station - Part 2: Safety requirements for construction and performance of safe breaks for use on dispensers
- GB/T 22380.1-2017Explosion protected safety technique of the petrol filling station—Part 1: Explosion protected safety technique requirements for fuel filling dispenser
Similar standards
How to Download GB/T 32476-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 32476-2016
$415.00