Valid

HG/T 4116-2023Rubber gaskets for drum washing machine viewing windows (English PDF)

滚筒洗衣机观察窗橡胶密封垫

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4116-2023 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 28, 2023

Implementation date

February 1, 2024

Scope

HG/T 4116-2023 is the English-translated version of 滚筒洗衣机观察窗橡胶密封垫.

HG/T 4116-2023 governs the rubber sealing gasket fitted to the observation window of a drum washing machine. The recommended chemical industry standard sets the structure, the requirements and the inspection rules, together with marking, packaging, transport and storage, and it describes the methods used to test the performance of the gasket.

It applies to rubber window seals, with or without a spray feature, for drum washing machines both with and without drying. The document supersedes HG/T 4116-2009, is classified G43, and was issued by the Ministry of Industry and Information Technology on 28 July 2023 with effect from 1 February 2024.

Found what you need?

Document preview — HG/T 4116-2023

National Standard of the People's Republic of China

ICS
83.140.50
Replacing
HG/T 4116-2009

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 3.1 Category A
  • 3.2 Category B
  • 4 Classification and designation
  • 4.1 General
  • 4.2 Character group 1
  • 4.3 Character group 2
  • 4.4 Character group 3
  • 4.5 Character group 4
  • 4.6 Designation example
  • 5 Test Methods
  • 5.1 Appearance requirements
  • 5.2 Technical requirements
  • 5.3 Environmental requirements
  • 6.1 Test conditions
  • 6.2 Test substrate
  • 6.3 Apparatus
  • 6.4 Appearance
  • 6.5 Coating property
  • 6.6 Shear elongation
  • 6.7 Tensile shear strength
  • 6.8 Tensile bond strength
  • 6.9 Free formaldehyde
  • 7 Inspection rules
  • 7.1 Inspection
  • 7.2 Batching
  • 7.3 Sampling
  • 7.4 Judgment of inspection results
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging
  • 8.3 Transportation
  • 8.4 Storage
  • 9 Packaging, transportation and storage

1 Foreword

HG/T 4116-2023 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 28 July 2023 and has been in force since 1 February 2024.

It replaces the earlier edition HG/T 4116-2009.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

HG/T 4116-2023 falls under ICS 83.140.50, in the field of rubber and plastics industries.

This catalogue holds 313 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other editions:

HG/T 4116-2009 (earlier edition)

Standards on related subjects:

GB/T 3672.1-2025 — Tolerances for rubber products - Part 1: Dimensional tolerances

HG/T 4622-2014 — Rubber compounds for seals used for dimethyl ether

GB/T 5721-1993 — General rules of identification, packaging, transportation and storage for rubber sealing products

HG/T 2331-2026 — Bladders for Hydraulic Separator-Type Accumulators

HG/T 6181-2023 — Rubber gaskets for engine oil pans

HG/T 4117-2009 — Rubber water seals for washing machines

5 Classification and status

International classification (ICS): 83.140.50

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of HG/T 4116

EditionTitleRevisionStatus
HG/T 4116-2023Rubber gaskets for drum washing machine viewing windowscurrent editionCurrent
HG/T 4116-2009Rubber gaskets for drum washing machine viewing windowsprevious editionSuperseded

This page sells the current edition, HG/T 4116-2023. Earlier editions are listed for reference only.

How to Download HG/T 4116-2023

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4116-2023

$150.00