Valid

HG/T 3540-2011Industrial circulating cooling water - Determination of total phosphate (English PDF)

工业循环冷却水中总磷酸盐含量的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3540-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

November 22, 2010

Implementation date

March 1, 2011

Scope

HG/T 3540-2011 is the English-translated version of 工业循环冷却水中总磷酸盐含量的测定.

HG/T 3540-2011 is the Chinese chemical industry standard that describes how the total phosphate content of industrial circulating cooling water is determined. The method laid down is the phosphomolybdenum blue spectrophotometric method.

It applies to total phosphate contents between 0.02 mg/L and 50 mg/L, expressed as PO4 3-, in industrial circulating cooling water. GB/T 603 and GB/T 6682 are quoted.

It replaces HG/T 3540-1990, which measured phosphorus in circulating cooling water by the ammonium molybdate spectrophotometric method. The standard is a recommended one, classified G76 in the Chinese scheme and issued by the Ministry of Industry and Information Technology.

Found what you need?

Document preview — HG/T 3540-2011

National Standard of the People's Republic of China

ICS
13.060.25
Replacing
HG/T 3540-1990

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 3540-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 22 November 2010 and has been in force since 1 March 2011.

It replaces the earlier edition HG/T 3540-1990.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the Chinese chemical industry standard that describes how the total phosphate content of industrial circulating cooling water is determined. The method laid down is the phosphomolybdenum blue spectrophotometric method. It applies to total phosphate contents between 0.02 mg/L and 50 mg/L, expressed as PO4 3-, in industrial circulating cooling water. GB/T 603 and GB/T 6682 are quoted. It replaces HG/T 3540-1990, which measured phosphorus in circulating cooling water by the ammonium molybdate spectrophotometric method. The standard is a recommended one, classified G76 in the Chinese scheme and issued by the Ministry of Industry and Information Technology.

HG/T 3540-2011 falls under ICS 13.060.25, in the field of environment and health protection, safety.

This catalogue holds 95 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 603

GB/T 6682

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 3540-1990 (earlier edition)

Standards on related subjects:

GB/T 6907-2022 — Analysis of water used in boiler and cooling system—Sampling method of water

GB/T 6903-2022 — Analysis of water used in boiler and cooling system—General rule

GB/T 6909-2018 — Analysis of water used in boiler and cooling system—Determination of hardness

HG/T 3539-2012 — Industrial circulating cooling water - Determination of iron content - 1,10-Phenanthroline spectrophotometric method

HG/T 3530-2012 — Industrial circulating cooling water - Sampling and preparation of sludge and corrosion product samples

HG/T 3531-2011 — Industrial circulating cooling water - Determination of water content in sludge and corrosion products

6 Classification and status

International classification (ICS): 13.060.25

Chinese Standard Classification (CCS): G 76

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 3540

EditionTitleRevisionStatus
HG/T 3540-2011Industrial circulating cooling water - Determination of total phosphatecurrent editionCurrent
HG/T 3540-1990Industrial circulating cooling water - Determination of total phosphateprevious editionSuperseded

This page sells the current edition, HG/T 3540-2011. Earlier editions are listed for reference only.

How to Download HG/T 3540-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3540-2011

$70.00