HG/T 3232-2009Building machines for soft-bead cycle tyres (English PDF)
软边力车胎成型机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3232-2009 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 4, 2009
Implementation date
June 1, 2010
Scope
HG/T 3232-2009 is the English-translated version of 软边力车胎成型机.
HG/T 3232-2009 is a recommended Chinese chemical industry standard for the building machines used to make soft-bead cycle tyres. It covers terms and definitions, model designations and basic parameters, requirements, test methods, inspection rules, marking, packaging, transport and storage for the machine.
It applies to building machines for soft-bead tyres for bicycles and handcarts. GB/T 191, GB/T 1801, GB 4208-2008, GB 5083, GB 5226.1, GB/T 6388, GB/T 8196, GB/T 12783, GB/T 13306, GB/T 13384, HG/T 3120, HG/T 3223 and HG/T 3228 are quoted in it.
It replaces HG/T 3232-1989. Issued on 4 December 2009, it has applied since 1 June 2010.
Found what you need?
Document preview — HG/T 3232-2009
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 3232-1989
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 3232-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 December 2009 and has been in force since 1 June 2010.
It replaces the earlier edition HG/T 3232-1989.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese chemical industry standard for the building machines used to make soft-bead cycle tyres. It covers terms and definitions, model designations and basic parameters, requirements, test methods, inspection rules, marking, packaging, transport and storage for the machine. It applies to building machines for soft-bead tyres for bicycles and handcarts. GB/T 191, GB/T 1801, GB 4208-2008, GB 5083, GB 5226.1, GB/T 6388, GB/T 8196, GB/T 12783, GB/T 13306, GB/T 13384, HG/T 3120, HG/T 3223 and HG/T 3228 are quoted in it. It replaces HG/T 3232-1989.
HG/T 3232-2009 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 191
GB/T 1801
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
GB 5083
GB 5226.1
GB/T 6388
GB/T 8196
GB/T 12783
GB/T 13306
GB/T 13384
HG/T 3120
HG/T 3223
HG/T 3228
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 3232-1989 (earlier edition)
Standards on related subjects:
GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines
JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines
GB 20055-2006 — Safety requirements of mill for rubber and plastics
HG/T 3227.2-2020 — Moulds for tyre covers - Part 2: Two-piece moulds
HG/T 3227.1-2020 — Moulds for tyre covers - Part 1: Segmented moulds
HG/T 3226.2-2011 — Tyre building drums - Part 2: Expandable and collapsible drums
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 95
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1801Geometrical product specifications (GPS) - Limits and fits - Selection of tolerance zones and fits
- GB 4208-2008Degrees of Protection Provided By Enclosure (IP Code)
- GB 5083General rules for designing the production facilities in accordance with safety and health requirements
- GB 5226.1Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 6388Transport package shipping mark
Similar standards
Editions of HG/T 3232
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3232-2009 | Building machines for soft-bead cycle tyres | current edition | Current |
| HG/T 3232-1989 | Building machines for soft-bead cycle tyres | previous edition | Superseded |
This page sells the current edition, HG/T 3232-2009. Earlier editions are listed for reference only.
How to Download HG/T 3232-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
GB 5083-1985 — General rules for designing the production facilities in accordance with safety and health requirements
GB 5083-1999 — General rules for designing the production facilities in accordance with safety and health requirements
HG/T 3232-2009
$130.00