HG/T 2906-2017Test method for static load performance of cycle tyres (English PDF)
力车轮胎静负荷性能试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2906-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 7, 2017
Implementation date
April 1, 2018
Scope
HG/T 2906-2017 is the English-translated version of 力车轮胎静负荷性能试验方法.
HG/T 2906-2017 is the Chinese standard "Test method for static load performance of cycle tyres". Its scope clause reads: This standard specifies the terms and definitions, test equipment and precision, test methods and test report for performance testing for cycle tyres.
This standard includes the overall dimension determination method and the static loaded performance testing method for cycle tyres. This standard is applicable to pneumatic cycle tyres.
This standard is not applicable to tubular racing-car tyres and non-pneumatic tyres. Its clauses include terms and definitions; test equipment and precision; test methods.
Found what you need?
Document preview — HG/T 2906-2017
National Standard of the People's Republic of China
- ICS
- 83.160.10
- Replacing
- HG/T 2906-2009
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Test equipment and precision
- 5 Test methods
- 6 Test report
- Annex A (Normative) Calculation of static loaded performance
1 Scope
This standard specifies the terms and definitions, test equipment and precision, test methods and test report for performance testing for cycle tyres. This standard includes the overall dimension determination method and the static loaded performance testing method for cycle tyres.
This standard is applicable to pneumatic cycle tyres.
This standard is not applicable to tubular racing-car tyres and non-pneumatic tyres.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB/T 1702 Cycle tyres
GB/T 6326 Tyre terms and definitions
GB/T 7377 Series of cycle tyres
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
3 Terms and definitions
For the purpose of this document, the terms and definitions specified in GB/T 6326 apply.
4 Test equipment and precision
4.1 Supporting platform
4.1.1
The surface of the supporting platform shall be of smooth steel, with the width exceeding the overall width of the inflatable section of tested tyre.
4.1.2
The loading capacity of tester loading device shall not exceed 2000kg.
4.1.3
The displacement and pressure display precision of tester shall be ±1% of the full measuring range.
4.2 Inflation pressure gauge
The maximum measuring range of pressure gauge shall meet the test requirements with a precision of ±10kPa.
4.3 Measuring appliance
4.3.1
Steel tape, of which the maximum length shall be at least 3000mm with a precision of ±1mm.
4.3.2
Caliper, of which the maximum length shall be at least 200mm with a precision of ±0.05mm.
5 Test methods
5.1 Test conditions
5.1.1
The appearance quality of tested tyres shall meet the requirements of GB/T 1702.
5.1.2
Install the tested tyre on the measuring rim specified in GB/T 7377, and inflate with the air pressure specified in GB/T 7377.
5.1.3
Put the assembly of tested tyre and rim at the laboratory temperature of 25±10°C, and keep for 3h at least.
5.2 Test procedures
5.2.1
Adjust the tyre kept to the recommended air pressure specified in GB/T 7377 again.
5.2.2
Measure the maximum outer circumference of the tyre with a steel tape, and calculate the outer diameter using Equation (1).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of HG/T 2906
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2906-2017 | Test method for static load performance of cycle tyres | current edition | Current |
| HG/T 2906-2009 | Test method for static load performance of cycle tyres | previous edition | Superseded |
This page sells the current edition, HG/T 2906-2017. Earlier editions are listed for reference only.
How to Download HG/T 2906-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 2906-2017
$85.00