HG/T 2704-2010Chlorinated polyethylene (English PDF)
氯化聚乙烯
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2704-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 22, 2010
Implementation date
March 1, 2011
Scope
HG/T 2704-2010 is the English-translated version of 氯化聚乙烯.
HG/T 2704-2010 is the recommended Chinese chemical industry standard covering chlorinated polyethylene. It classifies the material and sets the requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage.
The product in scope is the chlorinated polyethylene obtained by the chlorination of high-density polyethylene, PE-HD.
Its characterisation draws on the rubber and plastics methods GB/T 528, GB/T 531.1, GB/T 1232.1, GB/T 2914, GB/T 2916, GB/T 3864, GB/T 7139, GB/T 9345.1, GB/T 19466.3 and GB/T 21843, with GB/T 6679, GB/T 6682, GB/T 8170 and JJF 1070.
It takes the place of HG/T 2704-2002. Issued on 22 November 2010, it has applied since 1 March 2011.
Found what you need?
Document preview — HG/T 2704-2010
National Standard of the People's Republic of China
- ICS
- 83.080.20
- Replacing
- HG/T 2704-2002
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 2704-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 22 November 2010 and has been in force since 1 March 2011.
It replaces the earlier edition HG/T 2704-2002, HG/T 2704-1995.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard covering chlorinated polyethylene. It classifies the material and sets the requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage. The product in scope is the chlorinated polyethylene obtained by the chlorination of high-density polyethylene, PE-HD. Its characterisation draws on the rubber and plastics methods GB/T 528, GB/T 531.1, GB/T 1232.1, GB/T 2914, GB/T 2916, GB/T 3864, GB/T 7139, GB/T 9345.1, GB/T 19466.3 and GB/T 21843, with GB/T 6679, GB/T 6682, GB/T 8170 and JJF 1070. It takes the place of HG/T 2704-2002.
HG/T 2704-2010 falls under ICS 83.080.20, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 528-2009 — Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
GB/T 531.1-2008 — Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
GB/T 1232.1
GB/T 2914-2008 — Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of volatile matter (including water)
GB/T 2916
GB/T 3864
GB/T 6679-2003 — General rules for sampling solid chemical products
GB/T 6682
GB/T 7139-2002 — Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 9345.1-2008 — Plastics - Determination of ash - Part 1: Generalmethods
GB/T 19466.3
GB/T 21843
JJF 1070-2005 — Rules of Metrological Testing for Net Quantity of Products in Prepackages with Fixed Content
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2704-2002 (earlier edition)
HG/T 2704-1995 (earlier edition)
Standards on related subjects:
QB/T 2957-2008 — Determination of starch content of starch based plastics Thermogravimetry(TG)
GB/T 2917.1-2002 — Determination of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Congo red method
HG/T 2624-1994 — Microporous Styrene Type Weak Basic Anion Exchange Resin D 301-FC
HG/T 6394-2025 — Plastics - Glass fiber reinforced liquid crystalline polymer (LCP) compound
HG/T 6385-2025 — Plastics - Polycarbonate/acrylonitrile-butadiene styrene (PC/ABS) material for power battery module housing
HG/T 2709-2022 — Plastics - Determination of hydroxyl value of polyester polyols for polyurethane production
6 Classification and status
International classification (ICS): 83.080.20
Chinese Standard Classification (CCS): G 32
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 528-2009Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 531.1-2008Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
- GB/T 1232.1Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 1: Determination of Mooney viscosity
- GB/T 2914-2008Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of volatile matter (including water)
- GB/T 2916Plastic -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis using air-jet sieve apparatus
- GB/T 3864Industrial nitrogen
Similar standards
Editions of HG/T 2704
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2704-2010 | Chlorinated polyethylene | current edition | Current |
| HG/T 2704-2002 | Chlorinated polyethylene | previous edition | Superseded |
This page sells the current edition, HG/T 2704-2010. Earlier editions are listed for reference only.
How to Download HG/T 2704-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1232.1-2000 — Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Part 1: Determination of mooney viscosity
GB/T 1232.1-2016 — Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 1: Determination of Mooney viscosity
GB/T 19466.3-2004 — Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
HG/T 2704-2010
$105.00