Valid

HG/T 5780-2020High chlorinated polyethylene resin for coatings (English PDF)

涂料用高氯化聚乙烯树脂

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 5780-2020 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 9, 2020

Implementation date

April 1, 2021

Scope

HG/T 5780-2020 is the English-translated version of 涂料用高氯化聚乙烯树脂.

HG/T 5780-2020 is the recommended Chinese chemical industry standard for high chlorinated polyethylene resin intended for coatings. It classifies the resin and then sets its requirements, the test methods, the inspection rules and the provisions for marking, packaging and storage.

It applies to the high chlorinated polyethylene resins for coatings that are produced by the aqueous suspension process. The text quotes GB/T 1722-1992, GB/T 1723-1993, GB/T 1724-2019, GB/T 3186, GB/T 5211.3, GB/T 8170-2008, GB/T 9750, GB/T 9872-1998, GB/T 13491-1992, GB/T 37356 and HG/T 4346-2012. Issued on 9 December 2020, it has applied since 1 April 2021.

Found what you need?

Document preview — HG/T 5780-2020

National Standard of the People's Republic of China

ICS
87.060.20

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 5780-2020 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 December 2020 and has been in force since 1 April 2021.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the recommended Chinese chemical industry standard for high chlorinated polyethylene resin intended for coatings. It classifies the resin and then sets its requirements, the test methods, the inspection rules and the provisions for marking, packaging and storage. It applies to the high chlorinated polyethylene resins for coatings that are produced by the aqueous suspension process. The text quotes GB/T 1722-1992, GB/T 1723-1993, GB/T 1724-2019, GB/T 3186, GB/T 5211.3, GB/T 8170-2008, GB/T 9750, GB/T 9872-1998, GB/T 13491-1992, GB/T 37356 and HG/T 4346-2012.

HG/T 5780-2020 falls under ICS 87.060.20, in the field of paint and colour industries.

This catalogue holds 140 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 1722-1992 — Estimation of colour of varnishes,boiledoils and thinners

GB/T 1723-1993 — Determination of viscosity of coatings

GB/T 1724-2019 — Paints, varnishes and printing inks - Determination of fineness of grind

GB/T 3186

GB/T 5211.3

GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values

GB/T 9750

GB/T 9872-1998 — Rubber and thermoplastic elastomer - Determination of halogen content

GB/T 13491-1992 — General rule for packing of coatings

GB/T 37356

HG/T 4346-2012 — Chlorinated rubber resins for coatings

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

HG/T 5060-2016 — Anticorrosive coatings for liquefied natural gas (LNG) storage tanks

GB/T 6747-2008 — Shop primer for ship building

GB/T 5210-2006 — Paints and varnishes -- Pull-off test for adhesion

HG/T 5778-2020 — Ultraviolet (UV) curable coatings for cosmetic packaging materials

HG/T 5777-2020 — Fouling release antifouling coatings for ships

HG/T 5776-2020 — Waterborne coatings for surface coating of rubber seals

6 Classification and status

International classification (ICS): 87.060.20

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 5780-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 5780-2020

$95.00