GB/T 25263-2010Chlorinated rubber anticorrosive coatings (English PDF)
氯化橡胶防腐涂料
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 25263-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 26, 2010
Implementation date
August 1, 2011
Scope
GB/T 25263-2010 is the English-translated version of 氯化橡胶防腐涂料.
GB/T 25263-2010 is the Chinese standard "Chlorinated rubber anticorrosive coatings". Its scope clause reads: This standard specifies requirements for chlorinated rubber anti-corrosion coating products, test methods, inspection rules, marking, packaging and storage.
This standard applies to chlorinated rubber as the main film material, made of primer added plasticizers, pigments, solvents, etc., the intermediate layer paint, paint Anti-corrosion coatings. Its clauses include requirements.
Found what you need?
Document preview — GB/T 25263-2010
National Standard of the People's Republic of China
- ICS
- 87.040
- Classification
- G 51
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
1 Scope
This standard specifies requirements for chlorinated rubber anti-corrosion coating products, test methods, inspection rules, marking, packaging and storage.
This standard applies to chlorinated rubber as the main film material, made of primer added plasticizers, pigments, solvents, etc., the intermediate layer paint, paint
Anti-corrosion coatings.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 1725-2007 Paints, varnishes and plastics - Determination of volatile matter content is not (ISO 3251.2003, IDT)
GB/T 1726-1979 Determination of hiding power coatings
GB/T 1728-1979 paint, putty film drying time assay
GB/T 1766-2008 Paints and varnish coating aging rating method
GB/T 1771-2007 Paints and varnishes - Determination of resistance to neutral salt spray (ISO 7253.1996, IDT)
GB/T 1865-2009 Paints and varnishes - Artificial weathering and exposure to artificial radiation filtered xenon arc radiation (ISO 11341.
2004, IDT)
GB/T 3186-2006 Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528.2000, IDT)
GB/T 5210-2006 Paints and varnishes - Pull - off adhesion test (ISO 4624.2002, IDT)
GB/T 6742-2007 Paints and varnishes bending test (cylindrical axis) (ISO 1519.2002, IDT)
GB/T 6753.1-2007 Paints varnishes and printing inks Determination of fineness of grind (ISO 1524.2000, IDT)
GB/T 8170 repair value expressed about the rules and limit values and judgment
GB/T 8923 steel surface before painting Rust grades and preparation grades (GB/T 8923-1988, eqv ISO 8501-1. 1988)
GB/T 9271-2008 Paints and varnishes standard test panels (ISO 1514.2004, MOD)
GB/T 9274-1988 Paints and varnishes - determination of resistance to liquids (eqv ISO 2812. 1974)
GB/T 9278 paint sample conditioning and testing temperature and humidity (GB/T 9278-2008, ISO 3270. 1984, IDT)
GB/T 9286-1998 Paints and varnishes cut test (eqv ISO 2409.1992)
GB/T 9750 product packaging and marking paint
GB/T 9754-2007 Paints and varnishes contain metallic paint films of 20 °, 60 ° and 85 ° specular gloss measurement (ISO 2813.1994, IDT)
GB/T 13288.1 steel surface roughness characteristics - Part 1 before application of paints and spray steel surface treatment after cleaning. for
Evaluation after injection technology requirements and definitions ISO cleaned steel surface roughness of the surface roughness comparison specimens (GB/T 13288.1-
2008, ISO 8503-1. 1988, IDT)
GB/T 13452.2 Paints and varnishes - Determination of film thickness (GB/T 13452.2-2008, ISO 2808.2007, IDT)
GB/T 13491 General Paint Pack
GB/T 15608 Chinese color system
3 Requirements
Product performance should meet the requirements of Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 25263-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 25263-2010
$125.00