Valid

HG/T 4338-2012High chlorinated polyethylene anticorrosive coatings (English PDF)

高氯化聚乙烯防腐涂料

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4338-2012 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

November 7, 2012

Implementation date

March 1, 2013

Scope

HG/T 4338-2012 is the English-translated version of 高氯化聚乙烯防腐涂料.

HG/T 4338-2012 is a recommended chemical industry standard of China for high chlorinated polyethylene anticorrosive coatings. It classifies these coatings and then sets their requirements, the test methods, the inspection rules and the provisions on marking, packaging and storage.

It applies to coatings built on high chlorinated polyethylene resin as the main film-forming material, which places it in the paint and varnish class 87.040. Testing draws on the general coating standards it quotes, among them GB/T 1766-2008, GB/T 5210-2006 and GB/T 9286-1998. Issued on 7 November 2012, it has applied since 1 March 2013.

Found what you need?

Document preview — HG/T 4338-2012

National Standard of the People's Republic of China

ICS
87.040

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 4338-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2012 and has been in force since 1 March 2013.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended chemical industry standard of China for high chlorinated polyethylene anticorrosive coatings. It classifies these coatings and then sets their requirements, the test methods, the inspection rules and the provisions on marking, packaging and storage. It applies to coatings built on high chlorinated polyethylene resin as the main film-forming material, which places it in the paint and varnish class 87.040. Testing draws on the general coating standards it quotes, among them GB/T 1766-2008, GB/T 5210-2006 and GB/T 9286-1998.

HG/T 4338-2012 falls under ICS 87.040, in the field of paint and colour industries.

This catalogue holds 140 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 1725-2007 — Paints, varnishes and plastics -- Determination of non-volatile-matter content

GB/T 1726-1979 — Methods of test for hiding power of paints

GB/T 1728-1979 — Methods of test for drying time of coatings of paints and putties

GB/T 1732-1993 — Determination of impact resistance of film

GB/T 1766-2008 — Paints and Varnishes – Rating Schemes of Degradation of Coats

GB/T 1771-2007 — Paints and Varnishes -- Determination of resistance to neutral salt spray (fog)

GB/T 1865-2009 — Paints and varnishes -- Artificial weathering and exposure to artificial radiation -- Exposure to filtered xenon-arc radiation

GB/T 3186

GB/T 5210-2006 — Paints and varnishes -- Pull-off test for adhesion

GB/T 6742-2007 — Paints and varnishes -- Bend test (cylindrical mandrel)

GB/T 6753.1-2007 — Paints, varnishes and printing inks - Determination of fineness of grind

GB/T 8170

GB/T 8923

GB/T 9271-2008 — Paints and varnishes standard panels for testing

GB/T 9274-1988 — Paints and varnishes - Determination of resistance to liquids

GB/T 9278

GB/T 9286-1998 — Paints and varnishes--Cross cut test for films

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

HG/T 3952-2007 — Cathodic electrodeposition coatings

GB/T 3186-2006 — Paints, varnishes and raw materials for paints and varnishes -- Sampling

GB/T 5210-2006 — Paints and varnishes -- Pull-off test for adhesion

HG/T 4343-2024 — Waterborne multicolor architectural coatings

HG/T 4339-2024 — Coatings for machinery and equipment

HG/T 4346-2022 — Chlorinated rubber resins for coatings

6 Classification and status

International classification (ICS): 87.040

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

How to Download HG/T 4338-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4338-2012

$105.00