Valid

HG/T 2471-2011Metal anode coatings for electrolyzers (English PDF)

电解槽金属阳极涂层

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 2471-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

HG/T 2471-2011 is the English-translated version of 电解槽金属阳极涂层.

HG/T 2471-2011 is the Chinese standard "Metal anode coatings for electrolyzers". Its scope clause reads: This standard specifies the requirements, test methods, inspection rules for coating of dimensionally stable anode for electrolyzer, and packaging, marking, storage and transportation of dimensionally stable anode.

This standard applies to the coating of dimensionally stable anode in the electrolyzer with ruthenium as the main body and titanium as the substrate for the diaphragm electrolyzer of the chlor-alkali industry (hereinafter referred to as the diaphragm cell), the sodium hypochlorite industry non-diaphragm electrolyzer(hereinafter referred to as the sodium hypochlorite cell) and the chlorate industry non-diaphragm electrolyzer (hereinafter referred to as the chlorate cell) with NaCl aqueous solution as the electrolyte. Its clauses include terms and definitions.

Found what you need?

Document preview — HG/T 2471-2011

National Standard of the People's Republic of China

ICS
71.120.10
Replacing
HG/T 2471-2001

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 4 Materials
  • 5 Requirements
  • 6 Test samples
  • 7 Test methods
  • 8 Inspection rules
  • 9 Packaging, marking, storage and transportation

1 Scope

This standard specifies the requirements, test methods, inspection rules for coating of dimensionally stable anode for electrolyzer, and packaging, marking, storage and transportation of dimensionally stable anode.

This standard applies to the coating of dimensionally stable anode in the electrolyzer with ruthenium as the main body and titanium as the substrate for the diaphragm electrolyzer of the chlor-alkali industry (hereinafter referred to as the diaphragm cell), the sodium hypochlorite industry non-diaphragm electrolyzer(hereinafter referred to as the sodium hypochlorite cell) and the chlorate industry non-diaphragm electrolyzer (hereinafter referred to as the chlorate cell) with NaCl aqueous solution as the electrolyte.

2 Normative References

The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition applies.

GB/T 191 Packaging — Pictorial marking for handling of goods (GB/T 191-2008, eqv ISO 780: 1997)

GB/T 601 Chemical reagent — Preparations of reference titration solutions

GB/T 6682 Water for analytical laboratory use — Specification and test methods (GB/T 6682-2008, eqv ISO 3696: 1987)

GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values

GB/T 9723 Chemical reagent — General rule for flame atomic absorption spectrometric analysis

HG/T 3679 Ruthenium trichloride for dimensionally stable anode coating in electrolyzer

3 Terms and Definitions

For the purpose of this standard, the following terms and definitions apply.

3.1 dimensionally stable anode

precious metal oxide anode coated on the titanium substrate with ruthenium as the main body

3.2 ruthenium content

mass of ruthenium in dimensionally stable anode coating per unit area

3.3 homogeneous degree

degree of uniformity of the coating indicated by the relative standard deviation of the ruthenium content or the corresponding quantity value measured at multiple points

3.4 chlorine-liberated potential

potential of calomel electrode relative to saturated potassium chloride solution when chlorine evolution electrolytic reaction is carried out at a specified current density

3.5 polarisability

rate of change of the corresponding electrode potential as the current density changes during an electrolytic reaction and is expressed as the amount of change in electrode potential when the current density is changed by one order of magnitude

3.6 fortifying life

cumulative time for the electrolytic reaction of dimensionally stable anode coating in a solution of specified concentration of H2SO4 at a specified current density until the termination of the reaction of the dimensionally stable anode coating

3.7 fortifying weightlessness

amount of reduction of coating mass after electrolytic reaction of dimensionally stable anode coating in NaOH solution of specified concentration and at specified current density for specified time

3.8 test sample

sample for testing the performance of dimensionally stable anode coating

3.9 test piece

unit sample(s) taken from test sample(s) according to regulations and used for inspection of various items […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 2471

EditionTitleRevisionStatus
HG/T 2471-2011Metal anode coatings for electrolyzerscurrent editionCurrent
HG/T 2471-2001Metal anode coatings for electrolyzersprevious editionSuperseded

This page sells the current edition, HG/T 2471-2011. Earlier editions are listed for reference only.

How to Download HG/T 2471-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 2471-2011

$270.00