Valid

HG/T 4593-2014Metal anode electrolyzers for chlorates (English PDF)

氯酸盐金属阳极电解槽

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4593-2014 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 6, 2014

Implementation date

October 1, 2014

Scope

HG/T 4593-2014 is the English-translated version of 氯酸盐金属阳极电解槽.

HG/T 4593-2014 is the Chinese standard "Metal anode electrolyzers for chlorates".

Its scope clause reads: This standard specifies product classification, and model marking method, requirements, methods for test and inspection, inspection rules, marking, packaging, storage and transportation, ex-factory technical documents etc.of the dimensionally stable anode electrolyzer for chlorate.

This standard is applicable to diaphragm-free dimensionally stable anode electrolyzers for chlorate industry (hereinafter referred to as electrolyzers). Its clauses include product classification, and model marking method.

Found what you need?

Document preview — HG/T 4593-2014

National Standard of the People's Republic of China

ICS
23.020.30

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative references
  • 3 Product classification, and model marking method
  • 4 Requirements
  • 5 Methods for test and inspection
  • 6 Inspection rules
  • 7 Marking, packaging, storage and transportation, ex-factory technical documents

1 Scope

This standard specifies product classification, and model marking method, requirements, methods for test and inspection, inspection rules, marking, packaging, storage and transportation, ex-factory technical documents etc.of the dimensionally stable anode electrolyzer for chlorate.

This standard is applicable to diaphragm-free dimensionally stable anode electrolyzers for chlorate industry (hereinafter referred to as electrolyzers).

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 191-2008 Packaging — Pictorial marking for handling of goods (eqv ISO 780: 1997)

GB/T 700 Carbon Structural Steels

GB/T 2040 Copper and copper alloy sheet

GB/T 3190 Wrought aluminium and aluminium alloy — Chemical composition

GB/T 3274 Hot-rolled plates, sheets and strips of carbon structural steels and high strength low alloy structural steels

GB/T 3620.1 Designation and composition of titanium and titanium alloys

GB/T 3620.2 Titanium and titanium alloys—permissible variations of chemical composition for wrought product analysis

GB/T 3621 Titanium and titanium alloy plate and sheet

GB/T 3623 Titanium and titanium alloy wire

GB/T 5231 Wrought copper and copper alloys chemical composition limits and forms of wrought products

GB/T 8547 Titanium clad steel plate

GB/T 9969 General principles for preparation of instructions for use of industrial products

GB/T 10858 Aluminium and aluminium alloy wires and rods

GB/T 14957 Steel wires for melt welding

HG/T 2471 Coating of dimensionally stable anode for electrolyzer

JB/T 4730.5 Nondestructive testing of pressure equipments — Part 5: Penetrant testing

QB/T 3624 Polytetrafluoroethylene tube

QB/T 3625 Polytetrafluoroethylene plate

QB/T 4041 Polytetrafluoroethylene rod

3 Product classification, and model marking method

3.1 Product classification and code

The products of electrolyzer can be classified into monpolar and bipolar types according to the different connection modes of metal anode and cathode, and their codes are specified in Table 1 […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

How to Download HG/T 4593-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4593-2014

$85.00