HG/T 2469-2011Vertical sand mills (English PDF)
立式砂磨机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2469-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 2469-2011 is the English-translated version of 立式砂磨机.
HG/T 2469-2011 is the recommended Chinese chemical industry standard for vertical sand mills. It gives their classification and designation, the requirements, the test methods, the inspection rules and the provisions for marking, packaging and storage.
Vertical sand mills are its direct subject, and the same provisions are extended to twin-barrel sand mills, which work on the same principle. Its references include GB/T 699, GB/T 700, GB/T 1184, GB/T 1801, GB/T 3274, GB/T 3768, GB/T 4237, GB/T 8163, GB/T 11352, GB/T 13306 and GB/T 13384.
The standard takes the place of HG/T 2469-1993. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 2469-2011
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 2469-1993
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2469-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
It replaces the earlier edition HG/T 2469-1993.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard for vertical sand mills. It gives their classification and designation, the requirements, the test methods, the inspection rules and the provisions for marking, packaging and storage. Vertical sand mills are its direct subject, and the same provisions are extended to twin-barrel sand mills, which work on the same principle. Its references include GB/T 699, GB/T 700, GB/T 1184, GB/T 1801, GB/T 3274, GB/T 3768, GB/T 4237, GB/T 8163, GB/T 11352, GB/T 13306 and GB/T 13384. The standard takes the place of HG/T 2469-1993.
HG/T 2469-2011 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 699
GB/T 700
GB/T 1184
GB/T 1801
GB/T 2100
GB/T 3274
GB/T 3768
GB/T 4237
GB/T 8163
GB/T 9439
GB/T 11352
GB/T 13306
GB/T 13384
GB/T 14976
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2469-1993 (earlier edition)
Standards on related subjects:
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 2377-2009 — Virteous and porlelain enamels. Determination of resistance to boiling water and vapouy
HG/T 3914-2006 — Steam tube rotary drum dryers
HG/T 2650-2026 — Tubular heat exchangers
HG/T 2471-2011 — Metal anode coatings for electrolyzers
HG/T 2468-2009 — Stainless steel railway tank cars
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 93
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 699Quality carbon structure steels
- GB/T 700Carbon structural steels
- GB/T 1184Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1801Geometrical product specifications (GPS) - Limits and fits - Selection of tolerance zones and fits
- GB/T 2100Corrosion-resistant cast steels for general applications
- GB/T 3274Hot-rolled plates, sheets and strips of carbon structural steels and high strength low alloy structural steels
Similar standards
Editions of HG/T 2469
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2469-2011 | Vertical sand mills | current edition | Current |
| HG/T 2469-1993 | Vertical sand mills | previous edition | Superseded |
This page sells the current edition, HG/T 2469-2011. Earlier editions are listed for reference only.
How to Download HG/T 2469-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 11352-1989 — Carbon steel castings for general engineering purposes
GB/T 11352-2009 — Carbon Steel Castings for General Engineering Purpose
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
HG/T 2469-2011
$105.00