Valid

JB/T 13498-2018Crowned gear main couplings for main drives of vertical edger mills (English PDF)

立辊轧机主传动鼓形齿主联轴器

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 13498-2018 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 30, 2018

Implementation date

December 1, 2018

Scope

JB/T 13498-2018 is the English-translated version of 立辊轧机主传动鼓形齿主联轴器.

JB/T 13498-2018 is a recommended Chinese machinery industry standard for the main drive curved tooth coupling of an edger mill, described in the catalogue entry as the main drive drum-shaped coupling of a vertical rolling mill.

It sets the structural type, the basic parameters and main dimensions, and the type markings, then the technical requirements, the test methods and the inspection rules, and finally marking, packaging and storage.

Its Chinese standard classification is J19 and its international classification 21.120.20. Among the documents it is applied with are GB/T 191, GB/T 228.1, GB/T 3478.1-2008, GB/T 3478.2, GB/T 9239.1-2006, GB/T 10095.1-2008, GB/T 11345-2013 and GB/T 19868.3.

Found what you need?

Document preview — JB/T 13498-2018

National Standard of the People's Republic of China

ICS: 21.120.20

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Foreword
Scope
Normative references
About this standard
Classification and status

1 Foreword

JB/T 13498-2018 was issued by MIIT on 30 April 2018 and has been in force since 1 December 2018.

2 Scope

This standard is a recommended Chinese machinery industry standard for the main drive curved tooth coupling of an edger mill, described in the catalogue entry as the main drive drum-shaped coupling of a vertical rolling mill. It sets the structural type, the basic parameters and main dimensions, and the type markings, then the technical requirements, the test methods and the inspection rules, and finally marking, packaging and storage. Its Chinese standard classification is J19 and its international classification 21.120.20. Among the documents

3 Normative references

JB/T 13498-2018 cites the following standards, which apply in full or in part through the references made to them in its clauses.

GB/T 191

GB/T 228.1

GB/T 229

GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications

GB/T 3098.1-2010 — Mechanical properties of fasteners - Bolts, screws and studs

GB/T 3478.1-2008 — Straight cylindrical involute splines -- Metric module, side fit -- Part 1: Generalities

GB/T 3478.2

GB/T 4879

GB/T 6388

GB/T 7284

GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances

GB/T 10095.1-2008

GB/T 10095.2-2008

GB/T 11345-2013

GB/T 13384

GB/T 19868.3

JB/T 5000.1

4 About this standard

Issued by: MIIT

English translation: about 15 pages

5 Classification and status

International classification (ICS): 21.120.20

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

JB/T 12509-2015|JB/T 12508-2015|JB/T 11586-2013|JB/T 12050-2014|JB/T 13762-2020|JB/T 13763-2020

How to Download JB/T 13498-2018

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.