HG/T 2329-2011Rubber bushings for flexible universal joints of tractors (English PDF)
拖拉机挠性万向节橡胶衬套
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2329-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 2329-2011 is the English-translated version of 拖拉机挠性万向节橡胶衬套.
Rubber bushings for the flexible universal joints of tractors are the subject of HG/T 2329-2011, a recommended chemical industry standard. It sets the requirements for these bushings and the test methods, inspection rules, marking, packaging, transport and storage that accompany them.
Its scope covers the rubber bushings of the flexure-plate universal joints that couple the driving and driven plates of crawler tractors and their variants; bushings of the same type on other tractors may also be assessed by it.
Testing draws on GB/T 528, GB/T 531.1, GB/T 1682, GB/T 2828.1, GB/T 3512, GB/T 5721, GB/T 7759, GB/T 17492 and FZ/T 13010. It replaces HG/T 2329-1992. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 2329-2011
National Standard of the People's Republic of China
- ICS
- 83.140.01
- Replacing
- HG/T 2329-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 2329-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
It replaces the earlier edition HG/T 2329-1992.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
Rubber bushings for the flexible universal joints of tractors are the subject of HG/T 2329-2011, a recommended chemical industry standard. It sets the requirements for these bushings and the test methods, inspection rules, marking, packaging, transport and storage that accompany them. Its scope covers the rubber bushings of the flexure-plate universal joints that couple the driving and driven plates of crawler tractors and their variants; bushings of the same type on other tractors may also be assessed by it. Testing draws on GB/T 528, GB/T 531.1, GB/T 1682, GB/T 2828.1, GB/T 3512, GB/T 5721, GB/T 7759, GB/T 17492 and FZ/T 13010. It replaces HG/T 2329-1992.
HG/T 2329-2011 falls under ICS 83.140.01, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 528
GB/T 531.1
GB/T 1682
GB/T 2828.1
GB/T 3512
GB/T 5721
GB/T 7759
GB/T 17492
FZ/T 13010
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2329-1992 (earlier edition)
Standards on related subjects:
GB/T 14833-2020 — Synthetic materials sports field surfaces
HG/T 4070-2008 — Silicone rubber sheets
GB/T 5574-2008 — Industrial rubber sheet
HG/T 3747.1-2026 — Rubber and plastic floor covering material - Part 1: Rubber floor covering
HG/T 2864-2026 — Rubber and Plastic bumper used for vehicle
HG/T 2287-2026 — Rubber roller for printing
6 Classification and status
International classification (ICS): 83.140.01
Chinese Standard Classification (CCS): G 47
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 528Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 531.1Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
- GB/T 1682Vulcanized rubber - Determination of low-temperature brittleness - Single test piece method
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 3512Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests in hot air
- GB/T 5721General rules of identification, packaging, transportation and storage for rubber sealing products
Similar standards
Editions of HG/T 2329
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2329-2011 | Rubber bushings for flexible universal joints of tractors | current edition | Current |
| HG/T 2329-1992 | Rubber bushings for flexible universal joints of tractors | previous edition | Superseded |
This page sells the current edition, HG/T 2329-2011. Earlier editions are listed for reference only.
How to Download HG/T 2329-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
FZ/T 13010-1998 — Synthetic fibres canvas for rubber industry
FZ/T 13010-2018 — Canvas made of synthetic fibres for rubber industry
GB/T 1682-1994 — Rubber, vulcanized--Determination of low-temperature brittleness (single test piece method)
HG/T 2329-2011
$105.00