HG/T 2110-2011Tyre retreading curing presses (English PDF)
翻新轮胎硫化机
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2110-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 2110-2011 is the English-translated version of 翻新轮胎硫化机.
HG/T 2110-2011 is a recommended Chinese chemical industry standard covering curing presses for tyre retreading. It sets the terms and definitions, the model designation, the series and basic parameters, the requirements, the testing, the inspection rules and the rules for product marking, packaging and storage.
It applies to presses used to retread pneumatic tyres by the conventional method, while presses for partial-cure retreading and for the precure process fall outside it.
It works together with GB/T 191, GB 5226.1-2008, GB/T 12783, GB/T 13306, GB/T 13384, HG/T 2108, HG/T 3119-2006, HG/T 3120, HG/T 3223 and HG/T 3228. It replaces HG/T 2110-1991. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 2110-2011
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 2110-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2110-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
It replaces the earlier edition HG/T 2110-1991.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese chemical industry standard covering curing presses for tyre retreading. It sets the terms and definitions, the model designation, the series and basic parameters, the requirements, the testing, the inspection rules and the rules for product marking, packaging and storage. It applies to presses used to retread pneumatic tyres by the conventional method, while presses for partial-cure retreading and for the precure process fall outside it. It works together with GB/T 191, GB 5226.1-2008, GB/T 12783, GB/T 13306, GB/T 13384, HG/T 2108, HG/T 3119-2006, HG/T 3120, HG/T 3223 and HG/T 3228. It replaces HG/T 2110-1991.
HG/T 2110-2011 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 191
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 12783
GB/T 13306
GB/T 13384
HG/T 2108
HG/T 3119-2006 — Tyre shaping and curing presses - Test methods
HG/T 3120
HG/T 3223
HG/T 3228
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 16 pages
5 Related standards
Other editions:
HG/T 2110-1991 (earlier edition)
Standards on related subjects:
GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines
JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines
GB 20055-2006 — Safety requirements of mill for rubber and plastics
HG/T 2113-2011 — Rubber vulcanizing autoclaves - Testing and measuring methods
HG/T 2112-2011 — Cycle tyre curing presses
HG/T 2109-2011 — Bias tyre building machines
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 95
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 5226.1-2008Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 12783Editorial nominating method for the modeldesignation of rubber and plastics machinery
- GB/T 13306Plates
- GB/T 13384General specifications for packing of mechanical and electrical product
- HG/T 2108Determination of Noise Pressure Level of Rubber Machinery
Similar standards
Editions of HG/T 2110
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2110-2011 | Tyre retreading curing presses | current edition | Current |
| HG/T 2110-1991 | Tyre retreading curing presses | previous edition | Superseded |
This page sells the current edition, HG/T 2110-2011. Earlier editions are listed for reference only.
How to Download HG/T 2110-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 12783-1991 — Editorial nominating method for the model designation of rubber and plastics machinery
GB/T 12783-2000 — Editorial nominating method for the modeldesignation of rubber and plastics machinery
HG/T 2110-2011
$285.00