HG/T 2089-2014Test method for activity of catalysts for oxidation of sulphur dioxide to sulphuric acid (English PDF)
二氧化硫氧化制硫酸催化剂活性试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2089-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 14, 2014
Implementation date
April 1, 2015
Scope
HG/T 2089-2014 is the English-translated version of 二氧化硫氧化制硫酸催化剂活性试验方法.
HG/T 2089-2014 is the Chinese standard "Test method for activity of catalysts for oxidation of sulphur dioxide to sulphuric acid". Its scope clause reads: This standard specifies the test method of activity for oxidizing sulphuric dioxide into sulphuric acid catalyst.
This standard is applicable to the catalyst oxidizing sulphuric dioxide into sulphuric acid for oxidizing sulphuric dioxide to sulfur trioxide in the process of sulphuric acid production using the contact process. Its clauses include principle.
Found what you need?
Document preview — HG/T 2089-2014
National Standard of the People's Republic of China
- ICS
- 71.100.99
- Replacing
- HG/T 2089-2007
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative References
- 3 Principle
- 4 Test Apparatus
- 5 Sampling
- 6 Test Procedure
- 7 Calculation of Results
- Annex A (Normative) Determination of Length of Isothermal Zone of Reactor
- Annex B (Normative) Determination of Bulk Density of Catalyst Samples
- Annex C (Informative) Flow Calibration of Rotameter
1 Scope
This standard specifies the test method of activity for oxidizing sulphuric dioxide into sulphuric acid catalyst.
This standard is applicable to the catalyst oxidizing sulphuric dioxide into sulphuric acid for oxidizing sulphuric dioxide to sulfur trioxide in the process of sulphuric acid production using the contact process.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 601 Chemical Reagent — Preparations of Reference Titration Solutions
GB/T 603 Chemical Reagent — Preparations of Reagent Solutions for Use in Test Methods
GB/T 6003.1 Test Sieves — Technical Requirements and Testing — Part 1: Test Sieves of Metal Wire Cloth
HG/T 2086 The Catalyst Oxidizing Sulphuric Dioxide into Sulphuric Acid
3 Principle
sulphuric dioxide and oxygen in the air can be oxidized to sulfuric acid with the catalyst oxidizing sulphuric dioxide into sulphuric acid. The volume fraction of sulphuric dioxide in the gas before and after the reaction can be determined by the absorption amount of iodine standard titration solution, and the conversion rate of sulphuric dioxide can be calculated to characterize the activity of catalyst. The chemical reaction equation is as follows:
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 601Chemical Reagent - Preparations of Standard Volumetric Solutions
- GB/T 603Chemical reagent - Preparations of reagent solutions for use in test methods
- GB/T 6003.1Test sieves—Technical requirements and testing—Part 1:Test sieves of metal wire cloth
- HG/T 2086Catalysts for oxidation of sulfur dioxide to sulfuric acid
Similar standards
Editions of HG/T 2089
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2089-2014 | Test method for activity of catalysts for oxidation of sulphur dioxide to sulphuric acid | current edition | Current |
| HG/T 2089-2007 | Test method for activity of catalysts for oxidation of sulphur dioxide to sulphuric acid | previous edition | Superseded |
This page sells the current edition, HG/T 2089-2014. Earlier editions are listed for reference only.
How to Download HG/T 2089-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6003.1-1997 — Test sieves of metal wire cloth
GB/T 6003.1-2012 — Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth
GB/T 6003.1-2022 — Test sieves—Technical requirements and testing—Part 1:Test sieves of metal wire cloth
HG/T 2089-2014
$205.00