GB/T 6916-2008Power capacitors for damp tropics (English PDF)
湿热带电力电容器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 6916-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 30, 2008
Implementation date
April 1, 2009
Scope
GB/T 6916-2008 is the English-translated version of 湿热带电力电容器.
GB/T 6916-2008 is the Chinese standard "Power capacitors for damp tropics". Its scope clause reads: This standard specifies the use of environmental conditions of the humid tropics of power capacitors, and the corresponding technical requirements, test methods, inspection rules, marking Chi, packaging and storage.
This standard applies to the humid tropics region using various types of power capacitors (hereinafter referred to as a capacitor). Its clauses include terms and definitions; use of environmental conditions.
Found what you need?
Document preview — GB/T 6916-2008
National Standard of the People's Republic of China
- ICS
- 31.060.70
- Classification
- K 42
- Replacing
- GB/T 6916-1997
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Use of environmental conditions
- 5 Technical requirements and test methods
- 6 signs, packaging, transportation and storage
1 Scope
This standard specifies the use of environmental conditions of the humid tropics of power capacitors, and the corresponding technical requirements, test methods, inspection rules, marking
Chi, packaging and storage.
This standard applies to the humid tropics region using various types of power capacitors (hereinafter referred to as a capacitor).
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 2422 electric and electronic products environmental testing terminology (GB/T 2422-1995, eqv IEC 60068-5-2.1990)
GB/T 2423.4-1993 electric and electronic products environmental testing procedures Test Db. Damp heat test, cyclic (eqv
IEC 60068-2-30. 1980)
GB/T 2423.16-1999 Environmental testing for electric and electronic products Part 2. Test methods Test J and guidance. Mould growth (idt
IEC 60068-2-10. 1988)
GB/T 2423.17-1993 electric and electronic products environmental testing procedures Test Ka. Salt mist (eqv
IEC 60068-2-11. 1981)
GB/T 2900.16 Electrotechnical terminology - Power capacitors (GB/T 2900.16-1996, neqIEC 60050-436.1990)
JB/T 4159-1999 General technical requirements for tropical electrical products
3 Terms and Definitions
Except in this standard explicitly stated, the rest of the term shall be consistent with GB T 2900.16-1996, GB/T 2422 requirements /.
3.1
Test samples a set of parameter values used in the test environment conditions.
Alternating hot and humid test test severity is determined by a combination of high temperature and the temperature of the number of test cycles.
Mildew test severity is determined by the duration of the test.
4 Use of environmental conditions
4.1 normal environmental conditions
Normal environmental conditions for the Humid Tropics of the capacitor are shown in Table 1.
4.2 abnormal environmental conditions
Environmental conditions beyond the capacitor Table 1, the use of environmental conditions determined by the user in consultation with the manufacturer.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of GB/T 6916
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 6916-2008 | Power capacitors for damp tropics | current edition | Current |
| GB/T 6916-1997 | Power capacitors for damp tropics | previous edition | Superseded |
This page sells the current edition, GB/T 6916-2008. Earlier editions are listed for reference only.
How to Download GB/T 6916-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 6916-2008
$135.00