GB/T 5080.4-2026Equipment reliability testing—Part 4:Statistical procedures for exponential distribution—Point estimates, confidence intervals, prediction intervals and tolerance intervals (English PDF)
设备可靠性试验 第4部分:指数分布情况下的点估计、置信区间、预测区间和容许区间统计方法
This is a limited preview
Buy now to download the full PDF
Need quotation for your management?
Get a formal quotation for GB/T 5080.4-2026 in 30 minutes.
Issued by
State Administration for Market Regulation; Standardization Administration of China
Level / Type
National · Recommended
Issue date
October 30, 2026
Implementation date
February 1, 2027
Scope
GB/T 5080.4-2026 is the English-translated version of 设备可靠性试验 第4部分:指数分布情况下的点估计、置信区间、预测区间和容许区间统计方法.
GB/T 5080.4-2026 is the Chinese national standard "Equipment reliability testing—Part 4:Statistical procedures for exponential distribution—Point estimates, confidence intervals, prediction intervals and tolerance intervals".
It was issued on October 30, 2026 by the State Administration for Market Regulation and the Standardization Administration of China, and takes effect on February 1, 2027. It is a current standard and replaces GB/T 5080.4-1985.
Found what you need?
Document preview — GB/T 5080.4-2026
National Standard of the People's Republic of China
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 2.2 Symbols
- 3 Terms and Definitions
1 Foreword
GB/T 5080.4-2026 was issued by State Administration for Market Regulation; Standardization Administration of China on 30 October 2026 and takes effect on 1 February 2027.
It replaces the earlier edition GB/T 5080.4-1985.
It is one of 10 parts of the GB/T 5080 series.
2 Scope Preview
GB/T 5080.4-2026 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 76,457 other GB/T standards.
Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of China
4 Related standards
Other parts of this standard:
GB/T 5080.1-1986 — Equipment reliability testing--General requirements
GB/T 5080.1-2012 — Reliability testing -- Part 1: Test conditions and statistical test principles
GB/T 5080.2-1986 — Equipment reliability testing--Guidance for the design of test cycles
GB/T 5080.2-2012 — Reliability testing -- Part 2: Design of test cycles
GB/T 5080.5-1985 — Equipment reliability testing. Compliance test plans for success ratio
GB/T 5080.5-2026 — Reliability testing—Part 5: Compliance test plans for success ratio
GB/T 5080.6-1996 — Equipment reliability testing. Tests for the validity of a constant failure rate assumption
GB/T 5080.6-2026 — 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity
GB/T 5080.7-1986 — Equipment reliability testing. Compliance test plans for failure rate and mean time between failures assuming constant failure rate
Other editions:
GB/T 5080.4-1985 (earlier edition)
5 Classification and status
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 22200.5-2025Reliability of low-voltage apparatus - Part 5: Reliability test method of residual current operated circuit-breaker for household and similar uses
- GB/T 46568.1-2025Intelligent instruments reliability - Part 1: Reliability test and evaluation methods
- GB/T 25441-2022The motors for vacuum cleaners
- JB/T 13687-2019Grating encoders - Reliability test method
- JB/T 13609-2018Specification for electronic starting switches for single-phase motors
- JB/T 12021.1-2014Reliability test and evaluation for intelligent instrument - Part 1: General rule
Editions of GB/T 5080.4
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 5080.4-2026 | Equipment reliability testing—Part 4:Statistical procedures for exponential distribution—Point estimates, confidence intervals, prediction intervals and tolerance intervals | — | Valid from 2027-02-01 |
| GB/T 5080.4-1985 | Equipment reliability testing. Procedure for point estimates and confidence intervals from reliability determination tests (Exponential distribution) | — | Valid until 2027-02-01 |
This page sells the current edition, GB/T 5080.4-2026. Earlier editions are listed for reference only.
How to Download GB/T 5080.4-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 5080.5-2026 — Reliability testing—Part 5: Compliance test plans for success ratio
GB/T 5080.2-1986 — Equipment reliability testing--Guidance for the design of test cycles
GB/T 5080.5-1985 — Equipment reliability testing. Compliance test plans for success ratio
GB/T 5080.4-2026
$255.00