JB/T 12021.1-2014Reliability test and evaluation for intelligent instrument - Part 1: General rule (English PDF)
智能仪表可靠性试验与评估 第1部分：通用导则
This is a limited preview
Buy now to download the full PDF (23 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12021.1-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 12021.1-2014 is the English-translated version of 智能仪表可靠性试验与评估 第1部分：通用导则.
JB/T 12021.1-2014 opens the Chinese machinery industry series on reliability testing of intelligent instruments and carries recommended status. Part 1 sets out the general rules, that is the methods and the procedures used in common for the reliability test and the reliability evaluation of an intelligent instrument.
It applies to the reliability testing and evaluation of intelligent instruments generally, leaving the instrument-specific procedures to the later parts of the series.
The standard is classified N10 in China and 25.040.40 internationally. It quotes GB 2689.1-1981 to GB 2689.4-1981, GB/T 2900.13, the three parts of GB/T 3358, GB/T 5080.4, GB/T 17614.1, GB/T 18271.1, JB/T 6214-1992 and JB/T 50123. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — JB/T 12021.1-2014
National Standard of the People's Republic of China
- ICS
- 25.040.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 12021.1-2014 was issued by MIIT on 6 May 2014 and has been in force since 1 October 2014.
It is one of 4 parts of the JB/T 12021 series.
2 Scope
JB/T 12021.1-2014 opens the Chinese machinery industry series on reliability testing of intelligent instruments and carries recommended status. Part 1 sets out the general rules, that is the methods and the procedures used in common for the reliability test and the reliability evaluation of an intelligent instrument. It applies to the reliability testing and evaluation of intelligent instruments generally, leaving the instrument-specific procedures to the later parts of the series. The standard is classified N10 in China and 25.040.40 internationally. It quotes GB 2689.1-1981 to GB 2689.4-1981, GB/T 2900.13, the three parts of GB/T 3358, GB/T 5080.4, GB/T 17614.1, GB/T 18271.1, JB/T 6214-1992 and JB/T 50123.
3 Normative references
JB/T 12021.1-2014 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB 2689.1-1981
GB 2689.2-1981
GB 2689.3-1981
GB 2689.4-1981
GB/T 2900.13
GB/T 3358.1
GB/T 3358.2
GB/T 3358.3
GB/T 5080.4
GB/T 17614.1
GB/T 18271.1
JB/T 6214-1992 — Guide for reliability compliance tests and determination tests (exponential distribution) of instruments
JB/T 50123
4 About this standard
Issued by: MIIT
English translation: about 23 pages
5 Related standards
Other parts of this standard:
JB/T 12021.2-2014 — Part 2: Reliability test and evaluation for intelligent vortex flowmeter
JB/T 12021.3-2014 — Part 3: Reliability test and evaluation for intelligent pressure transmitter
JB/T 12021.4-2014 — Part 4: Reliability test and evaluation for intelligent temperature transmitters
6 Classification and status
International classification (ICS): 25.040.40
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2900.13Electrotechnical terminology -- Dependability and quality of service
- GB/T 3358.1Statistics -- Vocabulary and symbols -- Part 1: General statistical terms and terms used in probability
- GB/T 3358.2Statistics -- Vocabulary and symbols -- Part 2: Applied statistics
- GB/T 3358.3Statistics -- Vocabulary and symbols -- Part 3: Design of experiments
- GB/T 5080.4Equipment reliability testing. Procedure for point estimates and confidence intervals from reliability determination tests (Exponential distribution)
- GB/T 17614.1Transmitters for use in industrial-process control systems -- Part 1: Methods for performance evaluation
GB 2689.1-1981 · GB 2689.2-1981 · GB 2689.3-1981 · GB 2689.4-1981 · JB/T 50123
Cited by
- JB/T 12021.2-2014Reliability test and evaluation for intelligent instrument - Part 2: Reliability test and evaluation for intelligent vortex flowmeter
- JB/T 12021.3-2014Reliability test and evaluation for intelligent instrument - Part 3: Reliability test and evaluation for intelligent pressure transmitter
- JB/T 12021.4-2014Reliability test and evaluation for intelligent instrument - Part 4: Reliability test and evaluation for intelligent temperature transmitters
Similar standards
How to Download JB/T 12021.1-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17614.1-2015 — Transmitters for use in industrial-process control systems -- Part 1: Methods for performance evaluation
GB/T 18271.1-2017 — Process measurement and control devices -- General methods and procedures for evaluating performance -- Part 1: General considerations
GB/T 2900.13-2008 — Electrotechnical terminology -- Dependability and quality of service
Secure payment via Stripe
Payments accepted
JB/T 12021.1-2014
$405.00