GB/T 4984-2023Chemical analysis of refractories containning zirconia (English PDF)
含锆耐火材料化学分析方法
This is a limited preview
Buy now to download the full PDF (38 pages)
Need quotation for your management?
Get a formal quotation for GB/T 4984-2023 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 28, 2023
Implementation date
July 1, 2024
Scope
GB/T 4984-2023 is the English-translated version of 含锆耐火材料化学分析方法.
GB/T 4984-2023 is the Chinese standard "Chemical analysis of refractories containning zirconia".
Its scope clause reads: This document specifies methods for the chemical analysis of zirconium-containing refractories: The analysis items of this document are as follows: a) Loss on ignition (LOI); b) Silica (SiO2); c) Aluminum oxide (Al2O3); d) Zirconia (hafnium) [Zr(Hf)O2]; e) Zirconia (ZrO2); f) Hafnium oxide (HfO2); g) Titanium dioxide (TiO2); h) Iron oxide (Fe2O3); i) Potassium oxide (K2O); j) Sodium oxide (Na2O); k) Calcium oxide (CaO); l) Magnesium oxide (MgO); m) Manganese monoxide (MnO); n) Phosphorus pentoxide (P2O5); o) Chromium trioxide (Cr2O3); p) Yttrium trioxide (Y2O3): The measurement range applicable to the analysis items in this document is shown in Table 1: Table 1 Measuring range Analysis item measurement range (mass fraction)/% Analysis item measurement range (mass fraction)/% LOI -1~40 K2O <=20 SiO2 <=50 Na2O <=20 Al2O3 <=90 CaO <=20 Zr(Hf)O2 1~99 MgO <=20 ZrO2 <=95 MnO <=20 HfO2 <=20 P2O5 <=20 TiO2 <=20 Cr2O3 <=40 Fe2O3 <=20 Y2O3 <=20. Its clauses include normative reference documents.
Found what you need?
Document preview — GB/T 4984-2023
National Standard of the People's Republic of China
- ICS
- 81.080
- Classification
- Q 40
- Replacing
- GB/T 4984-2007
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Instruments and Equipment
- 5 Sample preparation
- 6 General
- 7 Test Report
- 8 Determination of loss on ignition
- 9 Determination of Silica
- 10 Determination of aluminum oxide
- 11 Determination of zirconium oxide (hafnium)
- 12 Determination of titanium dioxide
- 13 Determination of iron oxide
- 14 Determination of potassium oxide, sodium oxide, calcium oxide, magnesium oxide and iron oxide
- 15 Determination of manganese monoxide
- 16 Determination of phosphorus pentoxide
- 17 Determination of chromium trioxide
- Appendix A (Normative) Procedure for Acceptance of Analytical Values
- Appendix B (informative) Establishment of standard curve for inductively coupled plasma emission spectrometer
1 Scope
This document specifies methods for the chemical analysis of zirconium-containing refractories: The analysis items of this document are as follows:
a) Loss on ignition (LOI);
b) Silica (SiO2);
c) Aluminum oxide (Al2O3);
d) Zirconia (hafnium) [Zr(Hf)O2];
e) Zirconia (ZrO2);
f) Hafnium oxide (HfO2);
g) Titanium dioxide (TiO2);
h) Iron oxide (Fe2O3);
i) Potassium oxide (K2O);
j) Sodium oxide (Na2O);
k) Calcium oxide (CaO);
l) Magnesium oxide (MgO);
m) Manganese monoxide (MnO);
n) Phosphorus pentoxide (P2O5);
o) Chromium trioxide (Cr2O3);
p) Yttrium trioxide (Y2O3):
The measurement range applicable to the analysis items in this document is shown in Table 1:
Table 1 Measuring range
Analysis item measurement range (mass fraction)/% Analysis item measurement range (mass fraction)/%
LOI -1~40 K2O <=20
SiO2 <=50 Na2O <=20
Al2O3 <=90 CaO <=20
Zr(Hf)O2 1~99 MgO <=20
ZrO2 <=95 MnO <=20
HfO2 <=20 P2O5 <=20
TiO2 <=20 Cr2O3 <=40
Fe2O3 <=20 Y2O3 <=20
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all change orders) applies to […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 38 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 16555-2025Chemical analysis of refractories containing carbon, silicon carbide or nitride
- GB/T 46537-2025Alumina continuous fibre
- GB/T 6900-2025Chemical analysis of alumino-silicate refractories
- GB/T 5069-2024Chemical analysis of magnesia-alumina refractories
- GB/T 18931-2022Classification of basic dense shaped refractory products containing less than 7% residual carbon
- GB/T 23294-2021Abrasion resistant refractory materials
Similar standards
Editions of GB/T 4984
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 4984-2023 | Chemical analysis of refractories containning zirconia | current edition | Current |
| GB/T 4984-2007 | Chemical analysis of refractories containning zirconia | previous edition | Superseded |
This page sells the current edition, GB/T 4984-2023. Earlier editions are listed for reference only.
How to Download GB/T 4984-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 4984-2023
$515.00