GB/T 46000-2025Water saving enterprises—Wood processing and products industry (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" drafting.

1 Scope

This document specifies the evaluation index system and requirements for water-saving enterprises in the wood processing and wood products industry.

This document applies to wood processing such as fiberboard, particleboard, plywood, laminate flooring, solid wood composite flooring, solid wood flooring and wooden doors and windows evaluation of water-saving enterprises of water and its product manufacturers.

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document.

For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to this document.

GB/T 7119 Guidelines for the evaluation of water-saving enterprises

GB/T 12452 General rules for water balance test

GB/T 18259 Terminology for wood-based panels and their surface decoration

GB/T 18820 General rules for the compilation of industrial water quotas

GB/T 21534 Terminology for Water Conservation

GB/T 24789 General rules for the provision and management of water metering instruments in water-using units

3 Terms and Definitions

The terms and definitions defined in GB/T 7119, GB/T 18259, GB/T 18820 and GB/T 21534 apply to this document.

4 Evaluation index system and requirements

4.1 The water-saving enterprise evaluation index system includes basic requirements, management indicators and technical indicators.

4.2 The basic requirements that water-saving enterprises should fully meet are shown in Table 1.

4.3 The management indicators and requirements that water-saving enterprises should meet are shown in Table 2. The management indicators are calculated according to the method given in Appendix A.

4.4 The technical indicators and requirements that water-saving enterprises should fully meet are shown in Table 3. The technical indicators are calculated according to the method given in Appendix B.