Valid

GB/T 460-2008Paper-determination of the sizing value (English PDF)

纸施胶度的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 460-2008 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 19, 2008

Implementation date

May 1, 2009

Scope

GB/T 460-2008 is the English-translated version of 纸施胶度的测定.

GB/T 460-2008 is the Chinese standard "Paper-determination of the sizing value". Its scope clause reads: This standard specifies two main ways of measuring the degree of sizing of paper --- ink scribing method and liquid penetrant method.

The standard method is applicable to ink crossed cultural paper and writing paper, liquid penetrant method is suitable for low quantitative White. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 460-2008

National Standard of the People's Republic of China

ICS
85.010
Classification
Y 30
Replacing
GB/T 5405-2002

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4.1 Principle
  • 4.2 equipment, reagents and consumables
  • 4.3 of the sample taken, handling and preparation
  • 4.4 Test procedure

1 Scope

This standard specifies two main ways of measuring the degree of sizing of paper --- ink scribing method and liquid penetrant method.

The standard method is applicable to ink crossed cultural paper and writing paper, liquid penetrant method is suitable for low quantitative White.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 450 and take samples to an aspect of paper and paperboard samples, positive and negative determination (GB/T 450-2008, ISO 186.

2002, MOD)

GB/T 10739 paper, paperboard and pulp sample processing and testing standard atmospheric conditions (GB/T 10739-2002, eqv ISO 187.

1990)

3 Terms and Definitions

The following terms and definitions apply to this standard.

3.1

Indicates paper water resistance, ink including scribing method and the liquid penetrant method.

4 Method A. Ink streak method

4.1 Principle

With a standard ink on paper when crossed, to penetrate the non-proliferation nor the maximum line width (mm) to evaluate the water resistance of paper. Paper

Water resistance is stronger, the greater the degree of sizing.

4.2 equipment, reagents and consumables

4.2.1

scribe.

4.2.2 Linear pen (drawing pen)

Large and wide pen tip straight head straight pen.

4.2.3 Standard image sizing degree

printed with a standard width of the line dedicated film.

4.2.4

Comparison sizing degree of ink penetration and diffusion plate.

4.2.5 Magnifier

with a scale of 10 times magnification, scale graduation measuring distance is 0.05mm.

4.2.6 Standard inks

Determination of the degree of sizing standard ink.

4.2.7

Qualitative filter paper.

4.3 of the sample taken, handling and preparation

4.3.1

according to the provisions of GB/T 450 is sampled.

4.3.2

Sample according to the provisions of GB/T 10739 temperature and humidity were treated.

4.3.3

The prepared sample was cut along the banner of 150mm × 150mm specimen, indicating positive and negative. If the paper is double-sided, at least take

6 samples, positive and negative each measuring at least 3; if it is single-sided paper, should take at least three samples were measured.

4.4 Test procedure

4.4.1

The test shall be carried out under standard atmospheric conditions GB/T 10739 requirements.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of GB/T 460

EditionTitleRevisionStatus
GB/T 460-2008Paper-determination of the sizing valuecurrent editionCurrent
GB/T 5405-2002Paper-determination of the sizing valueprevious editionSuperseded

This page sells the current edition, GB/T 460-2008. Earlier editions are listed for reference only.

How to Download GB/T 460-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 460-2008

$85.00