GB/T 4588.3-2026Design and use of printed circuit boards (English PDF)
印制板的设计和使用
This is a limited preview
Buy now to download the full PDF
Need quotation for your management?
Get a formal quotation for GB/T 4588.3-2026 in 30 minutes.
Issued by
State Administration for Market Regulation; Standardization Administration of China
Level / Type
National · Recommended
Issue date
October 30, 2026
Implementation date
May 1, 2027
Scope
GB/T 4588.3-2026 is the English-translated version of 印制板的设计和使用.
GB/T 4588.3-2026 is the Chinese national standard "Design and use of printed circuit boards". It was issued on October 30, 2026 by the State Administration for Market Regulation and the Standardization Administration of China, and takes effect on May 1, 2027. It is a current standard and replaces GB/T 4588.3-2002.
Found what you need?
Document preview — GB/T 4588.3-2026
National Standard of the People's Republic of China
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 2.2 Symbols
- 3 Terms and Definitions
1 Foreword
GB/T 4588.3-2026 was issued by State Administration for Market Regulation; Standardization Administration of China on 30 October 2026 and takes effect on 1 May 2027.
It replaces the earlier edition GB/T 4588.3-2002, GB/T 4588.3-1988.
It is one of 8 parts of the GB/T 4588 series.
2 Scope Preview
GB/T 4588.3-2026 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 76,457 other GB/T standards.
Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of China
4 Related standards
Other parts of this standard:
GB/T 4588-2025 — Sectional specification for single and double sided rigid printed boards
GB/T 4588.1-1996 — Sectional specification for single and double sided rigid printed board
GB/T 4588.2-1996 — Sectional specification: single and double sided printed boards with plated-through holes
GB/T 4588.4-1996 — Sectional specification. Multilayer printed boards
GB/T 4588.4-2017 — Sectional specification for rigid multilayer printed boards
GB/T 4588.10-1995 — Printed boards. Part 10: Specification for flex-rigid double-sided printed boards with through connections
GB/T 4588.12-2000 — Specification for mass lamination panels (semi-manufactured multilayer printed boards)
Other editions:
GB/T 4588.3-2002 (earlier edition)
GB/T 4588.3-1988 (earlier edition)
5 Classification and status
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 18334-2025Specification for flexible multilayer printed boards
- GB/T 19405.3-2025Surface mounting technology - Part 3: Standard method for the specification of components for through hole reflow(THR) soldering
- JB/T 13433-2018Mine hoists - Medium-voltage variable frequency drive electrical control equipment - Technical requirements
- YC/T 10.14-2018Tobacco Machinery General Technical Conditions Part 14: Electrical Control Systems
- GB/T 17499-2017Microcomputer controller for household washing machine
- FZ/T 99014-2014Electrical equipment of textile machinery. General technical requirements
Editions of GB/T 4588.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 4588.3-2026 | Design and use of printed circuit boards | — | Valid from 2027-05-01 |
| GB/T 4588.3-2002 | Design and use of printed boards | — | Valid until 2027-05-01 |
| GB/T 4588.3-1988 | Design and use of printed boards | — | Obsolete |
This page sells the current edition, GB/T 4588.3-2026. Earlier editions are listed for reference only.
How to Download GB/T 4588.3-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 4588.4-2017 — Sectional specification for rigid multilayer printed boards
GB/T 4588.2-1996 — Sectional specification: single and double sided printed boards with plated-through holes
GB/T 4588.4-1996 — Sectional specification. Multilayer printed boards
GB/T 4588.3-2026
$255.00