JB/T 10306-2013Design Regulation on Greenhouse Climate Control System (English PDF)
温室控制系统设计规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10306-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 10306-2013 is the English-translated version of 温室控制系统设计规范.
JB/T 10306-2013 is a recommended Chinese machinery industry standard on the design of greenhouse climate control systems. It states the basic principles to be followed in designing such a system, what the system is to control and to what accuracy, and the methods by which this is tested.
The control system itself, the control equipment, the wiring and the sensors all fall within it. Filed under the Chinese classification P35 and the international classification 65.040.30, it was issued by the Ministry of Industry and Information Technology.
Among the standards it quotes are GB/T 2423.3, GB/T 4588.3, GB 4793.1, GB/T 6587-2012, GB 7947 and GB 18209.2. It supersedes JB/T 10306-2001.
Found what you need?
Document preview — JB/T 10306-2013
National Standard of the People's Republic of China
- ICS
- 65.040.30
- Replacing
- JB/T 10306-2001
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10306-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
It replaces the earlier edition JB/T 10306-2001.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard on the design of greenhouse climate control systems. It states the basic principles to be followed in designing such a system, what the system is to control and to what accuracy, and the methods by which this is tested. The control system itself, the control equipment, the wiring and the sensors all fall within it. Filed under the Chinese classification P35 and the international classification 65.040.30,Among the standards it quotes are GB/T 2423.3, GB/T 4588.3, GB 4793.1, GB/T 6587-2012, GB 7947 and GB 18209.2. It supersedes JB/T 10306-2001.
JB/T 10306-2013 falls under ICS 65.040.30, in the field of agriculture.
This catalogue holds 368 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2423.3
GB/T 2423.16
GB/T 2423.33
GB/T 4588.3
GB 4793.1
GB/T 6587-2012 — General specification for electronic measuring instruments
GB/T 5465.2
GB 7947
GB/T 16261
GB 18209.2
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10306-2001 (earlier edition)
Standards on related subjects:
GB 50144-2019 — Standard for appraisal of reliability of industrial buildings and structures
GB/T 50046-2018 — Standard for anticorrosion design of industrial constructions
SN/T 4233-2015 — Requirements for construction of designated quarantine facilities for imported cattle and sheep(or goats)
JB/T 13079-2017 — Protected agriculture equipment - Film roll-up devices for greenhouses
JB/T 13078-2017 — Protected agriculture equipment - Paper evaporative cooling pads for greenhouses
JB/T 10296-2013 — Design Regulation on Greenhouse Electrical Wiring
6 Classification and status
International classification (ICS): 65.040.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2423.3Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state
- GB/T 2423.16Environmental testing - Part 2: Test methods - Test J and guidance: Mould growth
- GB/T 2423.33Environmental testing—Part 2: Test methods—Test Kca: High concentration sulfur dioxid
- GB/T 4588.3Design and use of printed circuit boards
- GB 4793.1Safety requirements for electrical equipment for measurement,control,andlaboratory use-Part 1:General requirements
- GB/T 6587-2012General specification for electronic measuring instruments
Editions of JB/T 10306
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10306-2013 | Design Regulation on Greenhouse Climate Control System | current edition | Current |
| JB/T 10306-2001 | Design Regulation on Greenhouse Climate Control System | previous edition | Superseded |
This page sells the current edition, JB/T 10306-2013. Earlier editions are listed for reference only.
How to Download JB/T 10306-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 18209.2-2000 — Safety of machinery indication, marking and actuation Part 2: Requirements for marking
GB 18209.2-2010 — Electrical safety of machinery -- Indication, marking and actuation -- Part 2: Requirements for marking
GB 4793.1-1995 — Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1: General requirements
JB/T 10306-2013
$169.00