GB/T 4476.1-2008Drawing for metal hull of ships - Part 1: General provisions (English PDF)
金属船体制图 第1部分：一般规定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 4476.1-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 20, 2008
Implementation date
April 1, 2009
Scope
GB/T 4476.1-2008 is the English-translated version of 金属船体制图 第1部分：一般规定.
GB/T 4476.1-2008 is the Chinese standard "Drawing for metal hull of ships - Part 1: General provisions". Its scope clause reads: This section GB/T 4476 specifies the terms metal hull Mapping involved, drawing format, pattern proportion, writing method, FIG.
Line type and so on. This section applies to civilian vessels and naval auxiliary vessels drawing metal hull. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 4476.1-2008
National Standard of the People's Republic of China
- ICS
- 47.020
- Classification
- U 04
- Replacing
- GB/T 4476.1-1984
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
This section GB/T 4476 specifies the terms metal hull Mapping involved, drawing format, pattern proportion, writing method, FIG.
Line type and so on.
This section applies to civilian vessels and naval auxiliary vessels drawing metal hull.
2 Normative references
The following documents contain provisions which, through reference to GB/T 4476 to the present, constitute provisions of this section. For dated references,
All subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encourage an agreement under this section
Parties to study the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB 3101 general principles relating to amounts, units and symbols
GB 3102 (all parts), Quantities and Units
GB/T 13361 Technical Drawing generic term
GB/T 16948 Technical product documentation - Vocabulary term projection (eqv ISO 10209-2.1993)
CB/T 3243.3 ship product drawings and technical documents management - Part 3. basic format
3 Terms and Definitions
GB/T 13361 and GB/T 16948 and established the following terms and definitions apply to this section.
3.1
Fixed to the ship coordinate plane consisting of three orthogonal axes, namely the base plane, the midline of the face and the station side.
3.2
By the keel line and the intersection of the horizontal line of the station.
3.3
The hull symmetrical division, the base plane and perpendicular to the longitudinal plane.
3.4
The station, a transverse plane perpendicular to the substrate plane and neutral plane.
3.5
Deposit base line plane and the longitudinal plane or the transverse plane, perpendicular line measured baseline. Usually by the symbol "BL" she represents.
3.6
And the horizontal lines cross the midline plane or transverse plane. Usually by the symbol "CL" or expressed.
3.7
Hull shape of the design surface, that does not include the outer plate inner surface of the outer edge of the hull skeleton.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 4476.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 4476.1-2008 | Drawing for metal hull of ships - Part 1: General provisions | current edition | Current |
| GB/T 4476.1-1984 | Drawing for metal hull of ships - Part 1: General provisions | previous edition | Superseded |
This page sells the current edition, GB/T 4476.1-2008. Earlier editions are listed for reference only.
How to Download GB/T 4476.1-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 4476.2-2008 — Drawing for metal hull of ships - Part 2: Graphical symbols
GB/T 4476.3-2008 — Drawings for metal hull of ships - Part 3: Presentation and coding of drawings
GB/T 4476.4-2008 — Drawing for metal hull of ships - Part 4: Dimensioning
Secure payment via Stripe
Payments accepted
GB/T 4476.1-2008
$165.00