GB/T 43687-2024Technical requirements for compressed air energy storage system used for electrical energy storage (English PDF)
电力储能用压缩空气储能系统技术要求
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 43687-2024 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 15, 2024
Implementation date
October 1, 2024
Scope
GB/T 43687-2024 is the English-translated version of 电力储能用压缩空气储能系统技术要求.
GB/T 43687-2024 is the Chinese standard "Technical requirements for compressed air energy storage system used for electrical energy storage".
Its scope clause reads: This document specifies the system performance of compressed air energy storage system for power energy storage, compression energy storage system, gas storage system, heat storage and exchange system, expansion system, etc. The technical requirements for expansion energy release system, electrical system, instrumentation and control system, etc., describe the system performance test methods, and specify the system classification requirements.
This document is applicable to compressed air energy storage systems with a rated discharge power of 1MW and a rated discharge energy of 2MW·h and above. System, compressed air energy storage systems of other power and energy shall be implemented for reference.
Found what you need?
Document preview — GB/T 43687-2024
National Standard of the People's Republic of China
- ICS
- 27.180
- Classification
- F 19
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 General Requirements
- 5 System Classification
- 6 System Performance
- 7 Compressed Energy Storage System
- 8 Gas Storage System
- 9 Heat storage and exchange system
- 10 Expansion energy release system
- 11 Electrical System
- 12 Instrumentation and control systems
- 13 System performance test
- Appendix A (Informative) Compressed Air Energy Storage System Architecture
1 Scope
This document specifies the system performance of compressed air energy storage system for power energy storage, compression energy storage system, gas storage system, heat storage and exchange system, expansion system, etc.
The technical requirements for expansion energy release system, electrical system, instrumentation and control system, etc., describe the system performance test methods, and specify the system classification requirements.
This document is applicable to compressed air energy storage systems with a rated discharge power of 1MW and a rated discharge energy of 2MW·h and above.
System, compressed air energy storage systems of other power and energy shall be implemented for reference.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 150 (all parts) Pressure vessels
GB/T 151 Heat Exchanger
GB/T 384 Determination of calorific value of petroleum products
GB/T 2624.2 Measurement of full pipe flow rate using differential pressure devices installed in circular cross-section pipes Part 2.Orifice plates
GB/T 7064 Technical requirements for non-conductive pole synchronous generators
GB/T 8117 (all parts) Steam turbine thermal performance acceptance test procedures
GB/T 13609 Guidelines for Natural Gas Sampling
GB/T 13610 Composition analysis of natural gas - Gas chromatography
GB/T 14285 Technical specification for relay protection and safety automatic devices
GB/T 18940 Measurement of gas flow in closed pipes - Turbine flowmeter
GB/T 21391 Measurement of natural gas flow using gas turbine flowmeters
GB/T 25357 Positive displacement rotary compressors for use in petroleum, petrochemical and natural gas industrial processes
GB/T 25630 Turbine compressor performance test procedures
GB/T 31130 Coriolis mass flowmeter
GB/T 31464 Power grid operation guidelines
GB/T 36293 Technical requirements for distributed control systems of thermal power plants
GB/T 36572 Guidelines for network security protection of power monitoring systems
GB 38755 Guidelines for safety and stability of power systems
GB/T 40594 Technical Guidelines for Power System Network and Source Coordination
GB/T 50062 Design specification for relay protection and automatic devices of power installations
GB/T 50063 Design specification for electrical measuring instruments for power installations
GB 50251 Code for Design of Gas Pipeline Engineering
DL/T 544 Power Communication Operation Management Regulations
DL/T 843 Technical requirements for synchronous generator excitation system
DL/T 1402 Technical Specification for Synchronous Phaser Application at Plant and Substation
DL/T 1870 Technical Specification for Power System Network Source Coordination […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 151Heat exchangers
- GB/T 384Determination the heat of combustion for hydrocarbon fuels — Bomb calorimeter method
- GB/T 2624.2Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates
- GB/T 7064Specific requirements for cylindrical rotor synchronous machines
- GB/T 8117Rules for steam turbine thermal acceptance tests -- Part 1: Method A -- High accuracy for large condensing steam turbines
- GB/T 13609Natural gas - Gas sampling
GB/T 150 · DL/T 544 · DL/T 843
Similar standards
How to Download GB/T 43687-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
DL/T 1402-2015 — Technical Specification for Application of Synchrophasor in Power Plant and Substation
DL/T 1870-2018 — Technical specification for power grid and source coordination
DL/T 5440-2020 — Technical specification for the design of overhead transmission line in medium and heavy icing area
Secure payment via Stripe
Payments accepted
GB/T 43687-2024
$360.00