GB/T 43054-2023Railway applications—Lead-acid battery system for traction systems on railway motor trolley (English PDF)
轨道交通 轨道车牵引系统用铅酸蓄电池组
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 43054-2023 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 7, 2023
Implementation date
April 1, 2024
Scope
GB/T 43054-2023 is the English-translated version of 轨道交通 轨道车牵引系统用铅酸蓄电池组.
GB/T 43054-2023 is the Chinese standard "Railway applications—Lead-acid battery system for traction systems on railway motor trolley".
Its scope clause reads: This document specifies the environmental conditions, system composition and technical requirements, component technical requirements, and Test methods, inspection rules, marking, packaging, transportation and storage.
This document applies to lead-acid battery packs used in the main power traction systems of urban rail transit rail cars. The power traction systems of other rail cars use lead-acid battery packs as a reference. Its clauses include normative reference documents.
Found what you need?
Document preview — GB/T 43054-2023
National Standard of the People's Republic of China
- ICS
- 29.280
- Classification
- S 35
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative reference documents
- 3 Terms, definitions and symbols
- 4 Environmental conditions
- 5 System composition and technical requirements
- 5.1 System composition
- 5.2 Technical requirements for battery packs
- 5.3 Interface requirements for battery pack
- 6 Component technical requirements
- 6.1 Battery pack
- 6.2 BMS
- 7 Test method
- 7.1 Preparation before test
- 7.2 Component testing
- 7.3 System test
- 8 Inspection rules
- 8.1 Inspection classification
- 8.2 Factory inspection
- 8.3 Type inspection
- 8.4 Inspection items
- 9 Marking, packaging, transportation and storage
- 9.1 Logo
- 9.2 Packaging
- 9.3 Transport
- 9.4 Storage
1 Scope
This document specifies the environmental conditions, system composition and technical requirements, component technical requirements, and
Test methods, inspection rules, marking, packaging, transportation and storage.
This document applies to lead-acid battery packs used in the main power traction systems of urban rail transit rail cars.
The power traction systems of other rail cars use lead-acid battery packs as a reference.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.
GB 2894 Safety signs and guidelines for their use
GB/T 7403.1-2018 Lead-acid batteries for traction Part 1.Technical conditions
GB/T 9174 General technical conditions for general cargo transport packaging
GB/T 13337.1 Fixed vented lead-acid batteries Part 1.Technical conditions
GB/T 15479-1995 Technical requirements and test methods for insulation resistance and insulation strength of industrial automation instruments
GB/T 21413.1-2018 Electrical equipment for rail transit rolling stock Part 1.General conditions of use and general rules
GB/T 21414 Regulations on the protection of electrical hazards in rail transit rolling stock
GB/T 21563-2018 Impact and vibration test of rail transit rolling stock equipment
GB/T 24338.4 Rail transit electromagnetic compatibility Part 3-2.Rolling stock equipment
GB/T 25119 Electronic devices for rail transit rolling stock
GB/T 25343 (all parts) Welding of rail vehicles and their components for railway applications
GB/T 34119 Electrical connectors for rail transit rolling stock
GB/T 34571 Rail transit rolling stock wiring rules
GB/T 38661-2020 Technical conditions for battery management systems for electric vehicles
TB/T 3061 Batteries for rolling stock
TB/T 3138 Technical requirements for flame retardant materials used in rolling stock
ISO 5659-2 Plastics-Smokegeneration-Part 2.Determination of optical density by single-chamber method (Plastics-Smokegeneration-Part 2.
ISO 5660-1 Fire reaction test heat release, smoke production and mass loss rate Part 1.Heat release rate (cone calorimetry
IEC 61133.2016 Test methods for rail transit rolling stock after the rolling stock is manufactured and before it is put into use (Railwayappli- service) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 2894Safety colours and safety signs
- GB/T 7403.1-2018Lead-acid traction batteries -- Part 1: Technical conditions
- GB/T 9174General specification for transport packages of general cargo
- GB/T 13337.1Stationary lead-acid batteries -- Vented types -- Part 1: Technical conditions
- GB/T 15479-1995Technical requirements and test methods of insulation resistance and insulating strength for use in industrial process measurement and control instruments
- GB/T 21413.1-2018Railway applications -- Electric equipment for rolling stock -- Part 1: General service conditions and general rules
GB/T 25343 · ISO 5659-2 · ISO 5660-1
Similar standards
How to Download GB/T 43054-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 2894-2025 — Safety colours and safety signs
GB/T 13337.1-2011 — Stationary lead-acid batteries -- Vented types -- Part 1: Technical conditions
GB/T 15479-1995 — Technical requirements and test methods of insulation resistance and insulating strength for use in industrial process measurement and control instruments
Secure payment via Stripe
Payments accepted
GB/T 43054-2023
$305.00