Valid

GB/T 42204-2022Communication specification for clinical medical equipment—Imaging equipment (English PDF)

临床医疗设备通信规范 影像设备

Preview PDF

This is a limited preview

Buy now to download the full PDF (28 pages)

Need quotation for your management?

Get a formal quotation for GB/T 42204-2022 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 30, 2022

Implementation date

July 1, 2023

Scope

GB/T 42204-2022 is the English-translated version of 临床医疗设备通信规范 影像设备.

GB/T 42204-2022 is the Chinese national specification for how clinical medical imaging equipment exchanges data over a network.

It fixes the composition of the communication messages - command set, dataset, unique identifier and transfer syntax - and the protocol structure, from the upper layer protocol layer down to the message layer, the information exchange layer and the SCU/SCP layer, then adds data reliability requirements, PACS technical requirements, medical image consistency representation and image compression.

Its index also lists code tables for equipment type, examination location and part, query retrieval level and examination status, a normative annex on the communication scope, and worked annexes on socket-based TCP connection and image storage.

It applies to equipment with a digital medical imaging interface communicating with an image storage and archiving system. Issued on 30 December 2022, it has applied since 1 July 2023.

Found what you need?

Document preview — GB/T 42204-2022

National Standard of the People's Republic of China

ICS
35.240.80
Classification
C 07

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 3 Terms, Definitions and Abbreviations
  • 3.1 Terms and Definitions
  • 3.2 Abbreviations
  • 4 Composition structure of communication messages of clinical medical imaging equipment
  • 4.1 Overview
  • 4.2 Command Set
  • 4.3 Dataset
  • 4.4 Unique identifier
  • 4.5 Transfer Syntax
  • 5 Communication protocol structure of clinical medical imaging equipment
  • 5.1 Communication Protocol Architecture
  • 5.2 Network implementation model for communication of clinical medical imaging equipment
  • 5.3 Clinical medical imaging equipment communication upper layer protocol layer
  • 5.4 Message layer
  • 5.5 Information Exchange Layer
  • 5.6 SCU/SCP Layer
  • 6 Data reliability requirements
  • 7 PACS system technical requirements
  • 8 Medical Image Consistency Representation
  • 9 Image Compression
  • Appendix A (informative) Clinical medical imaging equipment information object
  • A.1 Clinical medical imaging equipment information object
  • A.2 Standard Information Objects
  • A.3 Composite Information Objects
  • Appendix B (Informative) Basic data set for communication of clinical medical imaging equipment
  • B.1 Clinical medical imaging equipment communication data dictionary
  • B.2 Medical Imaging Equipment Type Code Table
  • B.3 Check the location code relationship table
  • B.4 Check Part Code Relationship Table
  • B.5 Query Retrieval Level Code Relationship Table
  • B.6 Check Status Code Table
  • Appendix C (Normative) Communication scope of clinical medical imaging equipment
  • Appendix D (informative) TCP connection steps based on socket communication mechanism
  • Appendix E (informative) Communication message exchange service process of clinical medical imaging equipment
  • Appendix F (Informative) Example of Communication Image Storage of Clinical Medical Imaging Equipment
  • Reference

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting.

1 Scope

This document specifies the requirements for data communication (including information exchange and data exchange supported by network communication) of clinical medical imaging equipment, in order to And in the network, how clinical medical imaging equipment uses the application layer, presentation layer, and session layer in the OSI network to communicate.

This document is applicable to the communication between clinical medical imaging equipment with digital medical imaging interface and medical image storage and archiving system communication.

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.

NEMAPS3.10-2019 Health Informatics Medical Digital Imaging and Communication Part 10: Media Storage for Media Exchange

3 Terms, Definitions and Abbreviations

3.1 Terms and Definitions

The following terms and definitions apply to this document.

3.1.1 clinical medical imaging equipment

imaging, CR), ultrasound and other medical imaging equipment with digital medical imaging interface.

Note: These devices are used for the examination of various diseases, and have the characteristics of fast scanning time and clear images.

3.1.2 Consistency

Images generated by the same signal maintain data consistency and have the same visual performance under different display devices.

3.1.3 Object

A unit that represents some function or item of equipment.

3.1.4 Socket

An abstraction of endpoints for bidirectional communication between application processes on different hosts in a network.

Note: A socket is one end of process communication on the network, which provides a mechanism for application layer processes to exchange data using network protocols. from the position In other words, the socket connects to the application process and connects to the network protocol stack.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 28 pages — is available in the English PDF.

Similar standards

How to Download GB/T 42204-2022

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
28 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 42204-2022

$465.00