GB/T 41144-2021Requirements and test methods for ventilated protective clothing against radioactive aerosol (English PDF)
放射性气溶胶的通风防护衣要求与测试方法
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41144-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2021
Implementation date
July 1, 2022
Scope
GB/T 41144-2021 is the English-translated version of 放射性气溶胶的通风防护衣要求与测试方法.
GB/T 41144-2021 specifies the requirements and test methods for ventilated protective clothing against radioactive aerosols in China.
It covers isolated, air-supplied suits made of non-permeable material that are continuously fed with breathable air to keep a positive internal pressure, so that radioactive aerosols do not contaminate the body or reach the respiratory tract; powered air-filtering suits and other protective clothing are excluded.
The document defines radioactive aerosol and inward leakage, and sets out requirements and test methods drawing on Chinese standards for tear, seam and abrasion strength, flex damage, flammability and puncture resistance of the materials, together with marking.
Informative annexes describe how the protection factor and the field of view are tested. It is used by manufacturers and test laboratories. It was issued on 31 December 2021 and has applied since 1 July 2022.
Found what you need?
Document preview — GB/T 41144-2021
National Standard of the People's Republic of China
- ICS
- 13.340.10
- Classification
- C 57
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Requirements
- 5 Test method
- 6 Logo
- Appendix A (Informative) Protection Factor Test Method
- Appendix B (Informative) Field of View Test
- Reference
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1. Structure and Drafting Rules of Standardization Documents" drafted.
1 Scope
This document specifies requirements and test methods for ventilated protective clothing for radioactive aerosols.
This document applies to isolated air-supplied radioactive aerosol ventilation protective clothing. This document does not apply to powered air filter ventilation protective clothing and other protective clothing.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.
GB/T 3917.3 Tear properties of textile fabrics - Part 3. Determination of tear strength of trapezoidal specimens
GB/T 12586 Determination of flexural damage resistance of rubber or plastic coated fabrics
GB/T 13489 Determination of flammability of rubber-coated fabrics
GB/T 13773.1 Tensile properties of seams of textile fabrics and their products - Part 1. Determination of seam strength by strip method
GB/T 16556 Self-contained open circuit compressed air breathing apparatus
GB/T 20097 General requirements for protective clothing
GB/T 20655 Determination of mechanical properties of protective clothing and puncture resistance
GB/T 21196.2 Textiles - Determination of abrasion resistance of fabrics by Martindale method - Part 2. Determination of sample breakage
GB/T 23465 Practical performance evaluation of respiratory protective equipment
GB/T 24539 General technical requirements for chemical protective clothing for protective clothing
EJ435 Design, inspection, selection and use of protective clothing for radioactive contamination
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Radioactive aerosol
A dispersion of solid or liquid microparticles containing radionuclides in air or other gases.
3.2 Radioactive aerosol ventilated protective clothing
Manufactured from non-permeable materials and continuously supplied with breathable air to maintain internal ventilation and positive pressure to prevent radioactive aerosols (3.1) Protective clothing that contaminates body surfaces and/or enters respiratory tract.
3.3 Inward leakage
Under the specified test conditions, the measured value of the aerosol reagent concentration in the protective clothing and the measurement of the aerosol reagent concentration in the test ambient air ratio of values.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3917.3Textiles - Tear properties of fabrics - Part 3: Determination of tear force of trapezoid-shaped test specimens
- GB/T 12586Rubber or plastics-coated fabrics -- Determination of resistance to damage by flexing
- GB/T 13489Rubber coated fabrics - Determination of the burning behaviour
- GB/T 13773.1Textiles -- Seam tensile properties of fabrics and made-up textile articles -- Part 1: Determination of maximum force to seam rupture using the strip method
- GB/T 16556Respiratory protection - Self-contained open-circuit compressed air breathing apparatus
- GB/T 20097Protective clothing -- General requirements
GB/T 24539 · EJ435
Similar standards
How to Download GB/T 41144-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12586-2003 — Rubber or plastics-coated fabrics -- Determination of resistance to damage by flexing
GB/T 13489-2008 — Rubber coated fabrics - Determination of the burning behaviour
GB/T 13773.1-2008 — Textiles -- Seam tensile properties of fabrics and made-up textile articles -- Part 1: Determination of maximum force to seam rupture using the strip method
Secure payment via Stripe
Payments accepted
GB/T 41144-2021
$345.00