Valid

GB/T 41066.1-2021Petroleum drilling and production equipment - Offshore semisubmersible drilling unit - Part 1: Functional configuration and design (English PDF)

石油天然气钻采设备 海洋石油半潜式钻井平台 第1部分:功能配置和设计

Preview PDF

This is a limited preview

Buy now to download the full PDF (35 pages)

Need quotation for your management?

Get a formal quotation for GB/T 41066.1-2021 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2021

Implementation date

July 1, 2022

Scope

GB/T 41066.1-2021 is the English-translated version of 石油天然气钻采设备 海洋石油半潜式钻井平台 第1部分:功能配置和设计.

GB/T 41066.1-2021 is the Chinese standard "Petroleum drilling and production equipment - Offshore semisubmersible drilling unit - Part 1: Functional configuration and design".

Its scope clause reads: This document specifies the requirements for functional configuration and design of offshore oil semi-submersible drilling platforms (hereinafter referred to as "platforms"): This document applies to the overall configuration and design of new offshore oil semi-submersible drilling platforms:.

Found what you need?

Document preview — GB/T 41066.1-2021

National Standard of the People's Republic of China

ICS
75.180.10
Classification
E 92

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms, Definitions and Abbreviations
  • 4 Functional configuration
  • 5 Design

1 Scope

This document specifies the requirements for functional configuration and design of offshore oil semi-submersible drilling platforms (hereinafter referred to as "platforms"):

This document applies to the overall configuration and design of new offshore oil semi-submersible drilling platforms:

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document:

GB/T 2820:9 Reciprocating Internal Combustion Engine Driven Alternator Sets Part 9: Measurement and Evaluation of Mechanical Vibration

GB/T 2820:10 Reciprocating internal combustion engine-driven alternator sets - Part 10: Measurement of noise (cladding method)

GB/T 10833 Technical conditions for marine domestic sewage treatment equipment

GB/T 13705 General requirements for marine radio communication equipment

GB/T 14048:2 Low-voltage switchgear and controlgear - Part 2: Circuit breakers

GB/T 17755 Single-core and three-core extruded solid cores with a rated voltage of 6kV (Um=7:2kV) to 30kV (Um=36kV) for marine use

Insulated Power Cable

GB/T 19190 Oil and Gas Industry Drilling and Oil Production Lifting Equipment

GB/T 19666 General Rules for Flame Retardant and Fire Resistant Wires, Cables or Optical Cables

GB/T 22513 Oil and Gas Industry Drilling and Oil Production Equipment Wellhead Devices and Christmas Trees

GB/T 25058 Implementation Guide for Information Security Technology Network Security Level Protection

GB/T 25428 Oil and gas industry drilling and oil production equipment drilling and workover derricks and foundations

GB/T 25444:1 Electrical installations for mobile and fixed offshore installations - Part 1: General requirements and conditions

GB/T 30217:1 Drilling and oil production equipment for the oil and gas industry - Part 1: Design and design of offshore drilling riser equipment operate

GB/T 31049 Top Drive Drilling Device for Oil Drilling Rig

GB/T 32129 Halogen-free low-smoke flame retardant cable material for wire and cable

GB/T 34430:1 Ships and Offshore Technology Protective Coatings and Inspection Methods Part 1: Dedicated Seawater Ballast Tanks

GB/T 35989:1 Offshore floating structures for the oil and gas industry - Part 1: Monohulls, semi-submersible platforms and deep draft columns platform

GB/T 37934 Information Security Technology Industrial Control Network Security Isolation and Information Exchange System Security Technical Requirements

GB/T 39035 Redundant Design and Test Procedures for Redundant Dynamic Positioning Systems

GB/T 39185 Technical requirements for marine engineering ship dynamic positioning system

SY/T 5053:2 Oil and Gas Drilling Equipment, Wellhead Control Equipment and Diversion Equipment Control System

SY/T 5170 Steel wire rope for oil and gas industry

GB/T 23258 | SY/T 5164 | GB 50341 | GB/T 29169 | GB/T 17389 | GB/T 41066.3 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 35 pages — is available in the English PDF.

Referenced standards

Normative references

SY/T 5170

How to Download GB/T 41066.1-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
35 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 41066.1-2021

$455.00