GB/T 39185-2020Technology requirement for ocean engnieering ship dynamic positioning system (English PDF)
海洋工程船舶动力定位系统技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39185-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 11, 2020
Implementation date
May 1, 2021
Scope
GB/T 39185-2020 is the English-translated version of 海洋工程船舶动力定位系统技术要求.
GB/T 39185-2020 is the Chinese standard "Technology requirement for ocean engnieering ship dynamic positioning system". Its scope clause reads: This standard specifies the dynamic positioning classification, design technical requirements and test technical requirements of marine engineering ship dynamic positioning systems.
This standard applies to the design and inspection of the dynamic positioning system for marine engineering ships. Other ships or equipment with similar requirements, It can also be implemented by reference. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 39185-2020
National Standard of the People's Republic of China
- ICS
- 47.020.20
- Classification
- U 48
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Dynamic positioning classification
- 5 Technical requirements for dynamic positioning system design
- 5.1 General requirements
- 5.2 Technical requirements for power system design
- 5.3 Technical requirements for thruster system design
- 5.4 Design technical requirements for dynamic positioning control system
- 5.5 Technical requirements for failure mode and impact analysis
- 6 Technical requirements for dynamic positioning system test
- 6.1 Technical requirements for power system test
- 6.2 Test technical requirements for thruster system
- 6.3 Test technical requirements for dynamic positioning control system
- 6.4 Technical requirements for failure mode and effect analysis (FMEA) test
1 Scope
This standard specifies the dynamic positioning classification, design technical requirements and test technical requirements of marine engineering ship dynamic positioning systems.
This standard applies to the design and inspection of the dynamic positioning system for marine engineering ships. Other ships or equipment with similar requirements,
It can also be implemented by reference.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
IMCAM166 Failure Mode and Impact Analysis Guide
IMOMSC.1/Circ.1580 Dynamic Positioning System Ships and Equipment Guidelines
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Prescribed scope of work
The specified allowable ship position deviates from a certain set point.
3.2 Prescribed environmental conditions
With the specified wind speed, current and wave height, the ship can perform the expected operation under such environmental conditions.
3.3 Dynamic positioning
With automatic and (or) manual control, the ship can maintain its operation within the specified operating range and specified environmental conditions during its operation.
Ship position and/or heading.
3.4 Dynamic positioning ship
With automatic and (or) manual control, a ship that can maintain its position and (or) heading under specified operating ranges and specified environmental conditions.
3.5 Ship position keeping
Maintain the predetermined ship position, heading and track under the normal operating range and environmental conditions of the control system.
3.6 Marine engineering ship
A collective term for a series of ships that provide services for offshore operations.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 41066.2-2022Petroleum drilling and production equipment—Offshore semi-submersible drilling unit—Part 2: Construction, installation and commissioning acceptance
- GB/T 41066.1-2021Petroleum drilling and production equipment - Offshore semisubmersible drilling unit - Part 1: Functional configuration and design
Similar standards
How to Download GB/T 39185-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 39185-2020
$240.00