Valid

GB/T 40597-2021Power quality planning—General (English PDF)

电能质量规划 总则

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 40597-2021 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 11, 2021

Implementation date

May 1, 2022

Scope

GB/T 40597-2021 is the English-translated version of 电能质量规划 总则.

GB/T 40597-2021 sets out the general method for planning power quality in a power system. It gives the general requirements and the planning objectives, and then the content of power quality planning at three levels: for the whole system, for a region and for a single planning point, each with its own general requirements and planning content.

It defines power quality planning and disturbing load, meaning loads that adversely affect power quality, such as non-linear, unbalanced or shock loads, and builds on the national standards for voltage deviation, fluctuation and flicker, harmonics, three-phase unbalance, frequency deviation, interharmonics and voltage sags.

It is used by power companies and power users, was issued on 11 October 2021 and has applied since 1 May 2022.

Found what you need?

Document preview — GB/T 40597-2021

National Standard of the People's Republic of China

ICS
29.020
Classification
K 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 General requirements
  • 5 Planning objective
  • 6 System-oriented power quality planning
  • 6.1 General requirements
  • 6.2 Planning content
  • 7 Regional-oriented power quality planning
  • 7.1 General requirements
  • 7.2 Planning content
  • 8 Planning point-oriented power quality planning
  • 8.1 General requirements
  • 8.2 Planning content

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

1 Scope

This document specifies the overall method of power quality planning, including general requirements for power quality planning, planning goals, and system-oriented, Requirements for the content of power quality planning for regions and planning points.

This document is applicable to power quality planning by power companies and power users.

2 Normative references

The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.

GB/T 12325 Power quality power supply voltage deviation

GB/T 12326 Power quality voltage fluctuation and flicker

GB/T 14549 Power quality public grid harmonics

GB/T 15543 Power quality three-phase voltage unbalance

GB/T 15945 Power quality power system frequency deviation

GB/T 24337 Power Quality Interharmonics in Public Grid

GB/T 30137 Power quality voltage sag and short-term interruption

GB/T 32507-2016 Power Quality Terminology

DL/T 1198 Power System Power Quality Technical Management Regulations

DL/T 1208 Technical Guidelines for Power Quality Evaluation, Supply Voltage Deviation

DL/T 1344 Technical Specification for Interference User Access to Power System

DL/T 1375 Technical Guidelines for Power Quality Assessment Three-phase Voltage Unbalance

DL/T 1724 Technical Guidelines for Power Quality Evaluation, Voltage Fluctuation and Flicker

3 Terms and definitions

The following terms and definitions defined in GB/T 32507-2016 apply to this document.

3.1 Power quality planning

Develop a more comprehensive and long-term power quality development plan for the power system, planning area or single planning point, and clarify planning goals and plans. The process of planning content and plans.

3.2 Disturbing load

All kinds of loads connected to the power system that adversely affect power quality.

Note: Including non-linearity, unbalance, shock load, etc.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 40597-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 40597-2021

$135.00