GB/T 40047-2021Personal protective equipment—Eye and face protection for sports use—Ski goggles (English PDF)
个体防护装备 运动眼面部防护 滑雪镜
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 40047-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 30, 2021
Implementation date
June 1, 2021
Scope
GB/T 40047-2021 is the English-translated version of 个体防护装备 运动眼面部防护 滑雪镜.
GB/T 40047-2021 sets the requirements and test methods for ski goggles, as eye and face protection for skiing. It covers basic requirements such as biocompatibility, construction and adjustment, cleaning and disinfection, lens material and surface quality, and robustness.
The performance requirements deal with luminous transmittance, scattered light, refractive power, mechanical strength, field of view, minimum protected area, resistance to ultraviolet radiation, flame resistance, resistance to water and snow, anti-fog performance and abrasion resistance, each with its own test method.
Sunglasses, corrective eyewear and goggles for snowmobiles are excluded. Manufacturers and testing bodies use it to design and check goggles suited to the facial features of Chinese users. It was issued on 30 April 2021 and has applied since 1 June 2021.
Found what you need?
Document preview — GB/T 40047-2021
National Standard of the People's Republic of China
- ICS
- 97.220.40
- Classification
- Y 56
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Basic requirements
- 4.1 Biocompatibility
- 4.2 Structure and Adjustment
- 4.3 Cleaning and disinfection
- 4.4 Lens material and surface quality
- 4.5 Head model
- 4.6 Robustness and adaptability
- 5 Requirements
- 5.1 Transmittance
- 5.2 Scattered light
- 5.3 Diopter
- 5.4 Mechanical requirements
- 5.5 Field of view
- 5.6 Minimum protective area
- 5.7 Resistance to ultraviolet radiation
- 5.8 Flame resistance
- 5.9 Water resistance and snow resistance
- 5.10 Anti-fog performance
- 5.11 Wear resistance
- 6 Test method
- 6.1 Transmittance test method
- 6.2 Scattered light test method
- 6.3 Diopter test method
- 6.4 Mechanical strength test method
- 6.5 Visual Field Test Method
- 6.6 Test method of resistance to ultraviolet radiation
- 6.7 Flame retardancy test method
- 6.8 Test method for water resistance and snow resistance
- 6.9 Anti-fog performance test method
- 6.10 Abrasion resistance test method
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.
Introduction
Since the successful bid for the Beijing Winter Olympics in 2022, Beijing, Hebei, Changchun, Liaoning, Inner Mongolia, Xinjiang and other regions have targeted ice and snow sports. Implementation opinions have been issued, and ice and snow activities in various regions are becoming more abundant, and the enthusiasm of the people to participate in ice and snow sports continues to rise, which is an improvement Stepping prosperity has brought major opportunities. At the same time, eye and face injuries are common injuries in ice and snow sports, even if they are small, they can cause the patient's lifestyle Change. According to statistics, people who have common sense of eye protection during sports and have taken eye protection measures are better than those without eye protection measures. The facial injury rate has dropped by 24%. Taking appropriate eye and face protection measures during ice and snow sports can reduce damage and protect users Safety.
This document is based on the premise of protecting human eye and face safety, and is based on the current production, sales and use of ski goggles in my country. The measurement methods of existing relevant standards and international and foreign advanced standards (such as. European standard EN174-2001, American standard ASTMF659-2010 and the draft international standard ISO /FDIS18527-1), formulate the index requirements for ski goggles that meet the facial features of Chinese people, and standardize enterprises, The ski goggles testing methods used by testing organizations enhance the competitiveness of domestic related products in the international market and promote the development of international trade.
1 Scope
This document specifies the requirements and tests for ski goggles (hereinafter referred to as "ski goggles") in personal protective equipment, eye and face protective gear method.
This document applies to ski goggles used in ski sports.
This document does not apply to sunglasses, eye-correcting goggles and goggles for snowmobiles.
2 Normative references
The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 2410-2008 Determination of light transmittance and haze of transparent plastics
GB 13511.1-2011 Matched glasses Part 1: Single vision and multifocal
GB 13511.2-2011 Matching glasses Part 2: Gradual focus
GB 14866 Technical Requirements for Personal Eye Protectors
GB/T 32166.2-2015 Personal protective equipment Eye and face protection Occupational eye and face protection Part 2: Measurement method
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Design reference point
One or more points specified by the manufacturer on the finished surface of the lens blank or on the front surface of the lens.
Note: The design specifications apply to these points. The technical parameters may only apply to the lens at the wearing position --- for example, when the lens is added with a prism to compensate for the face angle Degree time.
3.2 Reference points (for measurement)
(Unpacked lens covering both eyes) A point on the lens specified by the manufacturer.
Note 1. The design reference point, and in the designated optical axis relative to the measuring instrument. Without any specific instructions, measure the reference point R to the bottom of the lens The distance to the top tangent is equal, and it is located on the symmetrical vertical dividing line of the two lenses. The pupil distance is the middle of the two R points. The pupil distance of the head model is shown in Figure 1.
Note 2. Generally, the values of refractive power and prism power measured on the surface of the lens may be different from the values measured in the specified direction relative to the line of sight of the eye. This is caused by The angle of the incident light rays passing through the lens may be different.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2410-2008Determination of the Luminous Transmittance and Haze of Transparent Plastics
- GB 14866General technical specification for eye and face protector
- GB/T 32166.2-2015Personal protective equipment—Eye and face protection—Occupational eye and face protectors—Part 2: Test methods
GB 13511.1-2011 · GB 13511.2-2011
Similar standards
How to Download GB/T 40047-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14866-2023 — General technical specification for eye and face protector
GB/T 2410-2008 — Determination of the Luminous Transmittance and Haze of Transparent Plastics
GB/T 32166.2-2015 — Personal protective equipment—Eye and face protection—Occupational eye and face protectors—Part 2: Test methods
Secure payment via Stripe
Payments accepted
GB/T 40047-2021
$240.00