Valid

GB/T 39828-2021Test method for determining elastic modulus of thick ceramic coating at elevated temperature (English PDF)

陶瓷厚涂层的高温弹性模量试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39828-2021 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 9, 2021

Implementation date

October 1, 2021

Scope

GB/T 39828-2021 is the English-translated version of 陶瓷厚涂层的高温弹性模量试验方法.

GB/T 39828-2021 is the Chinese method for determining the elastic modulus of a thick ceramic coating at high temperature by pulse excitation. It gives the terms and definitions, the principle, the design and preparation of the instrument, the specimens, the test, the results and their calculation and the test report.

It applies to thick ceramic coatings on metal or ceramic substrates up to 1500 °C, the coatings of thermal barriers and furnace parts. Coating firms, engine and furnace makers and laboratories use it. Issued on 9 March 2021, it has applied since 1 October 2021.

Found what you need?

Document preview — GB/T 39828-2021

National Standard of the People's Republic of China

ICS
81.060.20
Classification
Q 32

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Principle
  • 5 Equipment

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the terms and definitions, principles, and instrument design for testing the elastic modulus of ceramic thick coatings using the pulse excitation method at high temperatures. Preparation, samples, tests, results and calculations and test reports.

This standard applies to the test of the elastic modulus of ceramic thick coatings on metal substrates or ceramic substrates below 1500°C.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document. For undated reference documents, the latest version (including all amendments) is applicable to this document.

JC/T 2172 Fine ceramics elastic modulus, shear modulus and Poisson's ratio test method pulse excitation method

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Thickcoating

Coatings with thickness greater than 30µm.

3.2 Thickness ratio

The ratio of the thickness of the coating to the thickness of the substrate.

3.3 Composites

The whole formed by the coating and the substrate.

4 Principle

For a thick ceramic coating with a continuous interface and tightly bonded to the substrate, its elastic modulus can be calculated by the pulse excitation method and related formulas.

The elastic modulus of the coating is obtained by three parameters, namely the elastic modulus (Es) of the matrix sample, the elastic modulus (Eq) of the composite sample, the coating and The thickness ratio of the substrate (R=h/H). The values of Eq and Es are measured by the high-temperature pulse excitation method.

5 Equipment

5.1 Elastic modulus tester

A pulse excitation test system that should meet the requirements of JC/T 2172 and can be used in a high temperature environment.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 39828-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39828-2021

$155.00