Valid

GB/T 38522-2020Outdoor gas-burning appliance (English PDF)

户外燃气燃烧器具

Preview PDF

This is a limited preview

Buy now to download the full PDF (37 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38522-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 6, 2020

Implementation date

February 1, 2021

Scope

GB/T 38522-2020 is the English-translated version of 户外燃气燃烧器具.

GB/T 38522-2020 is the Chinese standard "Outdoor gas-burning appliance". Its scope clause reads: This standard specifies the classification and model, materials and structure, requirements, test methods, and inspection of outdoor gas burning appliances (hereinafter referred to as "burning appliances").

Inspection rules, signs, warnings and instructions, packaging, transportation and storage. This standard applies to gas-fired appliances that use gas as an energy source and have a rated thermal load not greater than 50 kW.

Found what you need?

Document preview — GB/T 38522-2020

National Standard of the People's Republic of China

ICS
91.140
Classification
P 45

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword III
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Classification and model
  • 4.1 Classification
  • 4.2 Type
  • 5 Materials and structures
  • 5.1 General materials
  • 5.2 General structure
  • 5.3 Cooking appliances
  • 5.4 Heating appliances
  • 5.5 Special burners
  • 6 Requirement
  • 6.1 Performance requirements
  • 6.2 Electrical safety
  • 7 Test method
  • 7.1 Test conditions
  • 7.2 Visual inspection
  • 7.3 Gas tightness test of gas system
  • 7.4 Thermal load accuracy test
  • 7.5 Combustion conditions test
  • 7.6 Extinguishing protection device test
  • 7.7 Ignition Performance Test
  • 7.8 Ignition Capability Test of Constant Fire
  • 7.9 Pre-cleaning test
  • 7.10 Gas Regulator Test
  • 7.11 Pressure/flow safety device test
  • 7.12 Overturn protection device test
  • 7.13 Water temperature limiting device test
  • 7.14 Surface temperature rise test
  • 7.15 Stability Test
  • 7.16 Wind resistance test
  • 7.17 Rain Resistance Test
  • 7.18 Salt spray resistance test
  • 7.19 Extreme temperature resistance test
  • 7.20 Special requirements for small gas cylinder burners
  • 7.21 Electrical safety test
  • 8 Inspection rules
  • 8.1 Factory inspection
  • 8.2 Type inspection
  • 9 Signs, warnings and instructions
  • 9.1 Signs
  • 9.2 Cautions
  • 9.3 Instruction
  • 10 Packaging, transportation and storage
  • 10.1 Packaging
  • 10.2 Transport
  • 10.3 Storage
  • Appendix A (informative appendix) This standard supports the basic requirements of GB 16914-2012. Table
  • Appendix B (Normative) Gas cylinders for small gas cylinders and burners

1 Scope

This standard specifies the classification and model, materials and structure, requirements, test methods, and inspection of outdoor gas burning appliances (hereinafter referred to as "burning appliances").

Inspection rules, signs, warnings and instructions, packaging, transportation and storage.

This standard applies to gas-fired appliances that use gas as an energy source and have a rated thermal load not greater than 50 kW.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 191 Packaging, storage and transportation icon

GB/T 2520 Cold-rolled electroplated tin plate and steel strip

GB/T 2828.1 Sampling inspection procedures for counts. Part 1. Sampling plan for batch inspections retrieved by acceptance quality limit (AQL)

GB/T 2828.2 Sampling inspection procedures for counting. Part 2. Sampling plan for inspection of isolated batches retrieved by limit quality (LQ)

GB/T 4208 enclosure protection grade (IP code)

GB 4706.1-2005 Safety of household and similar electrical appliances-Part 1. General requirements

GB 4806.3 National Food Safety Standard Enamel Products

GB 4806.9 National Food Safety Standard Metal Materials and Products for Food Contact

GB 4806.11 National Food Safety Standard Rubber Materials and Products for Food Contact

GB/T 5013.1 Rubber insulated cables with a rated voltage of 450/750V and below. Part 1. General requirements

GB/T 5171.1 Low-power motors Part 1. General technical conditions

GB/T 7306 (all parts) 55 ° sealed pipe thread

GB/T 7307 55 ° unsealed pipe thread

GB/T 10125 Artificial atmosphere corrosion test Salt spray test

GB/T 10410 Gas Chromatographic Analysis of Constant Components in Artificial Gas and LPG GB 11174 LPG GB/T 12350 Safety requirements for low power motors

GB/T 12716 60 ° sealed pipe thread

GB/T 13306 signs

GB/T 13611 Urban gas classification and basic characteristics

GB/T 14536.1 Electric automatic controllers for household and similar use Part 1. General requirements

GB/T 16411-2008 General test method for domestic gas appliances

GB 18111-2000 gas volumetric water heater

GB/T 30597-2014 General requirements for safety and control devices for gas burners and combustion appliances

GB 35844-2018 Bottled LPG Regulator

GB 35848-2018 commercial gas burning appliances

CJ/T 30 thermoelectric burner flameout protection device

CJ/T 180 building manual gas valve […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 37 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38522-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
37 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38522-2020

$570.00