GB/T 38278.6-2019Technical requirements of holographic anti-counterfeiting products—Part 6: Holographic anti-counterfeiting cold stamping foil (English PDF)
全息防伪产品技术条件 第6部分:冷烫印全息防伪箔
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38278.6-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 10, 2019
Implementation date
July 1, 2020
Scope
GB/T 38278.6-2019 is the English-translated version of 全息防伪产品技术条件 第6部分:冷烫印全息防伪箔.
GB/T 38278.6-2019 is the Chinese standard "Technical requirements of holographic anti-counterfeiting products—Part 6: Holographic anti-counterfeiting cold stamping foil".
Its scope clause reads: This part of GB/T 38278 specifies the terms, definitions, technical requirements, inspection methods, inspection rules and standards of cold stamping holographic anti-counterfeiting foil Zhi, packaging, transportation and storage.
This section applies to cold stamping holographic anti-counterfeiting foil transferred to paper, paper composites and other materials. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 38278.6-2019
National Standard of the People's Republic of China
- ICS
- 13.310
- Classification
- A 90
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 5 Inspection method
- 6 Inspection rules
- 7 Signs, packaging, transportation, storage
- Appendix A (informative appendix) Description of the structure of cold stamping holographic anti-counterfeiting foil
- Appendix B (informative appendix) Schematic diagram of roll quality requirements
- Appendix C (Normative Appendix) Hardness Test Step 12 of Coil Membrane
1 Scope
This part of GB/T 38278 specifies the terms, definitions, technical requirements, inspection methods, inspection rules and standards of cold stamping holographic anti-counterfeiting foil
Zhi, packaging, transportation and storage.
This section applies to cold stamping holographic anti-counterfeiting foil transferred to paper, paper composites and other materials.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
GB/T 451.3-2002 Determination of the thickness of paper and cardboard
GB/T 2793-1995 Determination of nonvolatile content of adhesives
GB/T 2828.1-2012 Counting sampling inspection procedures Part 1. Sampling by batch inspection according to acceptance quality limit (AQL) plan
GB/T 2829-2002 Sampling procedures and tables for periodic inspection counting (applicable to the inspection of process stability)
GB/T 6753.1-2007 Determination of grinding fineness of paints, varnishes and printing inks
GB/T 7122-1996 Determination of peel strength of high-strength adhesives by float roller method
GB/T 7706-2008 letterpress decoration printed matter
GB/T 14216-2008 Determination of wetting tension of plastic films and sheets
GB/T 14624.5-1993 Ink viscosity test method
GB/T 15717-1995 Vacuum metal coating thickness test method resistance method
GB/T 17000-2009 General technical requirements for holographic anti-counterfeiting products
GB/T 19425-2003 General technical conditions for anti-counterfeiting technology products
GB/T 22467.3-2008 General technical conditions for anti-counterfeiting materials Part 3. Anti-counterfeiting film
BB/T 0031-2008 Anodized aluminum hot stamping foil
CY/T 3-1999 Color evaluation lighting and observation conditions
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Cold stamping holographic anti-counterfeiting cold stamping foil
A holographic anti-counterfeiting foil with a functional coating, a plating layer and a protective layer attached to the substrate to complete the transfer at room temperature.
Note. See Appendix A for the basic structure of cold stamping holographic anti-counterfeiting foil.
3.2 Cold stamping
At room temperature, the holographic anti-counterfeiting foil coating is selectively transferred to the surface of the printing material through the synergy of pressure, bonding and peeling […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38278.6-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 38278.3-2025 — Technical requirements of holographic anti-counterfeiting products — Part 3: Anti-counterfeiting holographic hot stamping foil
GB/T 38278.2-2025 — Technical requirements of holographic anti-counterfeiting products — Part 2: Anti-counterfeiting holographic paper
GB/T 38278.1-2026 — Technical requirements of holographic anti-counterfeiting products-Part 1:General technical requirements of holographic anti-counterfeiting products
GB/T 38278.6-2019
$235.00