GB/T 38176-2019Building construction machinery and equipment—Steel reinforcement processing machinery—Safety requirements (English PDF)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

Introduction

According to the classification of GB/T 15706-2012, this standard belongs to the C standard.

This standard relates to the following stakeholders related to mechanical safety.

---manufacturer;

--- Health and safety agencies. Other stakeholders affected by the level of mechanical safety are.

---operator;

---owner;

---service provider.

The scope of the hazard, hazard or hazardous event covered by the machinery and the scope of this standard is given in the scope of this standard.

When the requirements of this standard are inconsistent with the requirements specified in the Class A or Class B standards, for those designed and manufactured in accordance with this standard.

Rebar processing machinery, the requirements in this standard take precedence over the requirements in Class A or (and) Class B standards. Construction machinery and equipment Steel processing machinery safety requirements

1 Scope

This standard specifies the verification and characterization of major risk lists, safety requirements and/or measures, safety requirements and/or measures for steel processing machinery. Use information.

This standard is applicable to steel with single or multiple functions such as reinforcement strengthening, straightening, cutting, bending, welding, extrusion, thread forming, upsetting, etc. Reinforcement processing machinery. Includes the following steel processing machinery.

---Reinforcement strengthening machinery.

---Steel straightening machine;

---Rebar cutting machine;

---Steel bending machine;

---Steel thread forming machine;

---Steel cage forming machine;

---Steel mesh forming machine;

--- Reinforced truss forming machine.

Other types of steel processing machinery can refer to this standard. This standard does not apply to steel prestressed machinery.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB 2893 security color

GB 2894 safety signs and guidelines for their use General rules and safety requirements for GB/T 3766 hydraulic drive systems and their components

GB/T 3768 Acoustic sound pressure method for the determination of noise source sound power level and sound energy level using the envelope measurement surface above the reflection surface Easy law

GB/T 5226.1-2008 Mechanical electrical safety machinery and electrical equipment - Part 1: General technical conditions

GB/T 7920.17 Rebar processing machinery terminology

GB/T 7932 Pneumatic pairing system and its components general rules and safety requirements

GB/T 9969 General guidelines for the use of industrial products

GB/T 12265.3 Mechanical safety to avoid the minimum spacing of various parts of the human body General ergonomic requirements for GB/T 14775 manipulators

GB 15578-2008 Safety requirements for resistance welding machines

GB/T 15706-2012 Mechanical Safety Design General Risk Assessment and Risk Reduction

GB/T 16754 mechanical safety emergency stop design principle

GB/T 16855.1 Safety related components of machinery safety control systems - Part 1

GB/T 16856 Mechanical Safety Risk Assessment Implementation Guide and Method Examples