Valid

GB/T 3764-200824° cone connectors - Ferrule (English PDF)

卡套

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 3764-2008 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 7, 2008

Implementation date

November 1, 2008

Scope

GB/T 3764-2008 is the English-translated version of 卡套.

GB/T 3764-2008 is the Chinese standard "24° cone connectors - Ferrule". Its scope clause reads: This standard specifies the dimensions, marking and technical requirements of the ferrule.

This standard applies to pipe outside diameter 4mm ~ 42mm, maximum working pressure of hydraulic fluid power and general 10MPa ~ 63MPa Purpose pipeline system. Its clauses include dimensions; mark; technical requirements.

Found what you need?

Document preview — GB/T 3764-2008

National Standard of the People's Republic of China

ICS: 21.060.60
Classification: J 15
Replacing: GB/T 3764-1983

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

1 Scope
2 Normative references
3 Dimensions
4 Mark
5 Technical requirements

1 Scope

This standard specifies the dimensions, marking and technical requirements of the ferrule.

This standard applies to pipe outside diameter 4mm ~ 42mm, maximum working pressure of hydraulic fluid power and general 10MPa ~ 63MPa

Purpose pipeline system.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 3765-2008 bite type tube fittings

3 Dimensions

Ferrules and ferrule end dimensions shall comply with Figure 1 and Table 1.

4 Mark

4.1 labeling method

Card sleeve labeling method shall comply with GB/T 3765's.

4.2 tag example

Card sets series L, card sets marked with an outer diameter of 10mm supporting the use of.

Card sets GB/T 3764 L10

5 Technical requirements

Technical requirements according to the provisions of GB/T 3765's.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

GB/T 28707-2012|GB/T 3733-2008|GB/T 3734-2008|GB/T 3735-2008|GB/T 3736-2008|GB/T 3737-2008

Editions of GB/T 3764

Edition	Title	Revision	Status
GB/T 3764-2008	24° cone connectors - Ferrule	current edition	Current
GB/T 3764-1983	24° cone connectors - Ferrule	previous edition	Superseded

This page sells the current edition, GB/T 3764-2008. Earlier editions are listed for reference only.

How to Download GB/T 3764-2008

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.