GB/T 3737-200824° cone connectors - Union (English PDF)
卡套式直通管接头
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 3737-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 7, 2008
Implementation date
November 1, 2008
Scope
GB/T 3737-2008 is the English-translated version of 卡套式直通管接头.
GB/T 3737-2008 is the Chinese standard "24° cone connectors - Union". Its scope clause reads: This standard specifies the ferrule type tube dimensions, marking and technical requirements of the joint and the joint body.
This standard applies to pipe outside diameter 4mm ~ 42mm, maximum working pressure of hydraulic fluid power and general 10MPa ~ 63MPa Purpose pipeline system. Its clauses include dimensions; mark; technical requirements.
Found what you need?
Document preview — GB/T 3737-2008
National Standard of the People's Republic of China
- ICS
- 21.060.60
- Classification
- J 15
- Replacing
- GB 3737.2-1983
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Dimensions
- 4 Mark
- 5 Technical requirements
1 Scope
This standard specifies the ferrule type tube dimensions, marking and technical requirements of the joint and the joint body.
This standard applies to pipe outside diameter 4mm ~ 42mm, maximum working pressure of hydraulic fluid power and general 10MPa ~ 63MPa
Purpose pipeline system.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 3759-2008 bite type pipe joint connector nut
GB/T 3764-2008 ferrule
GB/T 3765-2008 bite type tube fittings
3 Dimensions
Ferrule type tube connector and the connector body size should be consistent with FIG. 1, the provisions of Figure 2 and Table 1, the end of the connector body sleeve size should be consistent
GB/T 3764 provisions of.
4 Mark
4.1 labeling method
Card sets straight connector and labeling methods of pipe joint body shall comply with GB/T 3765's.
4.2 tag example
Connector Series L, the pipe diameter of 10mm, zinc coated steel ferrule type tube fittings marked.
Fittings GB/T 3737 L10
Connector Series L, the pipe diameter of 10mm, the surface of galvanized steel-card sets through connector body marked.
Joint body GB/T 3737 L10
5 Technical requirements
Technical requirements according to the provisions of GB/T 3765's.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 3737
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 3737-2008 | 24° cone connectors - Union | current edition | Current |
| GB 3737.2-1983 | 24° cone connectors - Union | previous edition | Superseded |
This page sells the current edition, GB/T 3737-2008. Earlier editions are listed for reference only.
How to Download GB/T 3737-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 3737-2008
$85.00