GB/T 3736-200824° cone connectors - Male long (English PDF)
卡套式锥螺纹长管接头
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 3736-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 7, 2008
Implementation date
November 1, 2008
Scope
GB/T 3736-2008 is the English-translated version of 卡套式锥螺纹长管接头.
GB/T 3736-2008 is the Chinese standard "24° cone connectors - Male long". Its scope clause reads: This standard specifies the dimensions, marking and technical requirements Straight thread long sleeve fittings and joints of the body.
This standard applies to pipe outside diameter 4mm ~ 42mm, maximum working pressure of hydraulic fluid power and general 10MPa ~ 40MPa Purpose pipeline system. Its clauses include dimensions; mark; technical requirements.
Found what you need?
Document preview — GB/T 3736-2008
National Standard of the People's Republic of China
- ICS
- 21.060.60
- Classification
- J 15
- Replacing
- GB 3736.2-1983
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Dimensions
- 4 Mark
- 5 Technical requirements
1 Scope
This standard specifies the dimensions, marking and technical requirements Straight thread long sleeve fittings and joints of the body.
This standard applies to pipe outside diameter 4mm ~ 42mm, maximum working pressure of hydraulic fluid power and general 10MPa ~ 40MPa
Purpose pipeline system.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 3759-2008 bite type pipe joint connector nut
GB/T 3764-2008 ferrule
GB/T 3765-2008 bite type tube fittings
3 Dimensions
Straight thread size sleeve length body fittings and joints shall conform to Figure 1, Figure 2 and Table 1 the provisions of the joint body ferrule end dimensions shall comply
GB/T 3764 provisions of.
4 Mark
4.1 labeling method
Card sets labeling method Straight thread long fittings and joints of the body shall comply with GB/T 3765's.
4.2 tag example
Connector Series L, the pipe diameter of 10mm, 55 ° sealing pipe thread (R), a steel sleeve type long thread taper surface galvanized pipe is connected
Head marked.
Fittings GB/T 3736 L10/R1/4
Connector Series L, the pipe diameter of 10mm, 55 ° sealing pipe thread (R), zinc coated steel ferrule Straight thread long connector
Body mark.
Joint body GB/T 3736 L10/R1/4
5 Technical requirements
Technical requirements according to the provisions of GB/T 3765's.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of GB/T 3736
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 3736-2008 | 24° cone connectors - Male long | current edition | Current |
| GB 3736.2-1983 | 24° cone connectors - Male long | previous edition | Superseded |
This page sells the current edition, GB/T 3736-2008. Earlier editions are listed for reference only.
How to Download GB/T 3736-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 3736-2008
$85.00