GB/T 3763-200824° cone connectors and flared couplings - Hexagon thin nut (English PDF)
管接头用六角薄螺母
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 3763-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 7, 2008
Implementation date
November 1, 2008
Scope
GB/T 3763-2008 is the English-translated version of 管接头用六角薄螺母.
GB/T 3763-2008 is the Chinese standard "24° cone connectors and flared couplings - Hexagon thin nut". Its scope clause reads: This standard specifies the pipe joint, Hexagon thin nut dimensions, marking and technical requirements.
This standard applies to the plate through the connecting pipe joint. Its clauses include dimensions; mark; technical requirements.
Found what you need?
Document preview — GB/T 3763-2008
National Standard of the People's Republic of China
- ICS
- 21.060.60
- Classification
- J 15
- Replacing
- GB/T 3763-1983
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Dimensions
- 4 Mark
- 5 Technical requirements
1 Scope
This standard specifies the pipe joint, Hexagon thin nut dimensions, marking and technical requirements.
This standard applies to the plate through the connecting pipe joint.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 3765-2008 bite type tube fittings
3 Dimensions
Hexagon thin nut with fittings shall conform to the dimensions of Figure 1 and Table 1.
4 Mark
4.1 labeling method
Fittings Hexagon thin nut with a labeling method should be consistent with the provisions of GB/T 3765's.
4.2 tag example
Thread size is M20 × 1.5, galvanized steel pipe joint surface with a thin hexagonal nut mark.
Nut GB/T 3763 M20 × 1.5
5 Technical requirements
Technical requirements according to the provisions of GB/T 3765's.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 3763
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 3763-2008 | 24° cone connectors and flared couplings - Hexagon thin nut | current edition | Current |
| GB/T 3763-1983 | 24° cone connectors and flared couplings - Hexagon thin nut | previous edition | Superseded |
This page sells the current edition, GB/T 3763-2008. Earlier editions are listed for reference only.
How to Download GB/T 3763-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 3763-2008
$75.00