Valid

GB/T 37470-2019Technical requirements of anti-counterfeiting structural 3D code (English PDF)

结构三维码防伪技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37470-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 10, 2019

Implementation date

December 1, 2019

Scope

GB/T 37470-2019 is the English-translated version of 结构三维码防伪技术条件.

GB/T 37470-2019 is the Chinese standard "Technical Requirements of Anti-Counterfeiting Structural 3D Code".

Its scope clause reads: This Standard specifies the definition, classification, requirements, test methods, inspection rules, product marking, package, transportation, storage and safety measures for the structural 3D code anti-counterfeiting technology products.

This Standard is applicable to the anti-counterfeiting technology products with structural 3D code. Its clauses include terms and definitions; classification; requirements; test methods; inspection rules; marking, package, transportation, storage and safety measures.

It was issued by the State Administration for Market Regulation on MAY 10, 2019 and took effect on DECEMBER 01, 2019.

Found what you need?

Document preview — GB/T 37470-2019

National Standard of the People's Republic of China

ICS: 13.310
Classification: A 90

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword3
1 Scope4
2 Normative References4
3 Terms and Definitions5
4 Classification5
5 Requirements5
6 Test Methods7
7 Inspection Rules8
8 Marking, Package, transportation, Storage and Safety Measures9

1 Scope

This Standard specifies the definition, classification, requirements, test methods, inspection rules, product marking, package, transportation, storage and safety measures for the structural 3D code anti-counterfeiting technology products.

This Standard is applicable to the anti-counterfeiting technology products with structural 3D code.

2 Normative References

The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document.

GB/T 2828.1-2012 Sampling Procedures for Inspection by Attributea-Part1:

Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-Lot Inspection

GB/T 17000 Universal Technical Requirements of Holographic Anti-Counterfeiting Products

GB/T 17004 Anti-Counterfeiting Technological Terminology

GB/T 19425-2003 Universal Technical Requirements of Anti-counterfeiting Technical Products

GB/T 22258-2008 Universal Technical Requirements of Anti-Counterfeiting Labels

GB/T 22467.3-2008 Universal Technical Requirements of Anti-Counterfeiting Material - Part 3: Anti-Counterfeiting Film

GB/T 23808-2009 Holographic Anti-Counterfeiting Film

6 Test Methods

6.3.1.2 Die-cutting center deviation

The die-cutting center deviation shall be conducted as per the provisions of 6.10 in GB/T 22258-2008.

6.3.2 Characteristic indicators of products with anti-counterfeiting film of structural 3D coded

The characteristic indicators of products with anti-counterfeiting film of structural 3D coded shall be conducted as per the method specified in 6.4 of GB/T 22467.3-2008.

6.4 Anti-counterfeiting identification characteristics

6.4.1 Characteristics, color layer, graphic color

Visually observe or take magnifier to observe under the D65 standard light source.

6.4.2 Light transmittance

The D65 standard light source was illuminated on the back of the sample and visually observed.

6.4.3 Characteristic information verification

Through the photographing method, collect the information in the characteristic area of the image and text; send the collected information to the database for comparison with the captured standard sample.

7 Inspection Rules

7.1 Batching

Take the deliver batch or trail-production batch of the same type and the same specification products as a batch.

7.2 Inspection classification

The inspection can be divided into exit-factory inspection and type inspection.

7.3 Exit-factory inspection

7.3.1 The manufacturer shall ensure that the products left the factory shall meet the requirements of this Standard; each coil (box) of products is attached with product […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

GB/T 31458-2026|GB/T 47478.1-2026|GB 10408-2025|GB 21556.2-2025|GB 46036-2025|GB/T 17001.1-2025

How to Download GB/T 37470-2019

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.