GB/T 37432-2019Full face tunnel boring machine remanufacturing (English PDF)
全断面隧道掘进机再制造
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37432-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 10, 2019
Implementation date
December 1, 2019
Scope
GB/T 37432-2019 is the English-translated version of 全断面隧道掘进机再制造.
GB/T 37432-2019 is the Chinese standard "Full face tunnel boring machine remanufacturing".
Its scope clause reads: This standard specifies the general requirements for the remanufacturing of full-face tunnel boring machines, main system and component requirements, safety requirements and environmental protection, Acceptance methods, signs, etc. This standard applies to the remanufacturing of waste/old full-section tunnel boring machines. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 37432-2019
National Standard of the People's Republic of China
- ICS
- 91.220
- Classification
- P 97
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 General requirements
- 5 Mainframe and main components requirements
- 6 Rear equipment and auxiliary system requirements
- 7 Safety and environmental requirements
- 8 Acceptance method
- 9 accompanying documents
- 10 logo
- Appendix A (informative) Full-section tunnel boring machine remanufacturing process
1 Scope
This standard specifies the general requirements for the remanufacturing of full-face tunnel boring machines, main system and component requirements, safety requirements and environmental protection,
Acceptance methods, signs, etc.
This standard applies to the remanufacturing of waste/old full-section tunnel boring machines.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 150 (all parts) pressure vessel
GB/T 151 heat exchanger
GB/T 307.2 Principles and methods for measurement and inspection of rolling bearings
GB/T 12467 (all parts) Metal material welding quality requirements
GB/T 13306 signage
Test and expression method of steady state performance of GB/T 17491 hydraulic pump, motor and integral transmission
GB/T 23253 hydraulic transmission electric control hydraulic pump performance test method
GB/T 27611 Recycling and remanufactured products General requirements and markings
Technical specification for remanufacturing and dismantling of GB/T 32804 earthmoving machinery parts
GB/T 34650 full-section tunnel boring machine shield machine safety requirements
GB 50150 Electrical installation engineering electrical equipment handover test standard
GB 50171 Electrical installation engineering panel, cabinet and secondary circuit wiring construction and acceptance specifications
GBZ 188 Occupational Health Monitoring Technical Specifications
JB/T 10205 hydraulic cylinder
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Full face tunnel boring machine
The tunnel is fully profiled by excavation and propulsion, and special mechanical equipment with peripheral casing is provided. Mainly including shield machines,
Rock tunnel boring machine, pipe jacking machine, etc.
[GB/T 34354-2017, definition 2.1]
3.2 Full-section tunnel boring machine remanufacturing
Based on the manufacturing mode of waste/old full-section tunnel boring machine resource recycling, applying new materials, new processes and new technologies to waste/old
The face tunnel boring machine is repaired and modified to make its function, performance, environmental protection, economy and safety characteristics not lower than a series of technical measures for the prototype new machine.
Construction or engineering activities.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 37432-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37432-2019
$235.00