Valid

GB/T 37058-2018Test specification for encoding and identification in library application (English PDF)

图书馆编码标识应用测试

Preview PDF

This is a limited preview

Buy now to download the full PDF (21 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37058-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 28, 2018

Implementation date

July 1, 2019

Scope

GB/T 37058-2018 is the English-translated version of 图书馆编码标识应用测试.

GB/T 37058-2018 sets out how library books, shelves and reader cards are coded and identified, and how the RFID tags that carry those codes are specified and tested.

For each of the three it gives the code identification rules, with the GS1 identifier structures and their RFID storage set out in normative annexes.

It then fixes the technical requirements of library RFID tags (appearance, dimensions, materials, frequency, air interface, performance and position) and the performance required in typical scenarios: label conversion, shelf inventory, book borrowing and access control.

Test methods are given for the tags and for those scenarios. It applies to the data encoding, selection, use and testing of library RFID book labels, shelf labels and reader cards. It was issued on 28 December 2018 and has applied since 1 July 2019.

Found what you need?

Document preview — GB/T 37058-2018

National Standard of the People's Republic of China

ICS: 35.040
Classification: A 24

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 Terms and Definitions
4 Library book code identification
4.1 Book Code Identification Overview
4.2 Book Code Identification
5 Library shelf code identification
5.1 Overview of the shelf code identification
5.2 shelf code identification
6 Library Reader ID Code Identification
6.1 Reader Code Encoding Logo Overview
6.2 Library Reader ID Code Identification
7 Library RFID Tag Technical Requirements
7.1 Overview
7.2 Appearance, Dimensions and Materials
7.3 Working frequency
7.4 Air Interface Requirements
7.5 Performance Requirements
7.6 Paste position
8 Library RFID Application Scenario Performance Requirements
8.1 Composition of the library RFID application system
8.2 Label Conversion
8.3 Counting the shelf
8.4 Book Borrowing
8.5 Access Control
9 Library RFID tags and typical application scenarios test methods
9.1 Test Environment
9.2 Pretreatment
9.3 Default tolerance
9.4 Testing of Library RFID Tags
9.5 Typical Application Scenario Test
Appendix A (Normative Appendix) GS1 Global Unified Identification System's Collection of Single-Item Primary Identifier Codes and RFID Storage
A.1 GS1 Global Uniform Identification System's collection of single-piece primary identifier code structures
A.2 GS1 Global Unified Identification System's collection of single-piece primary identifier codes for RFID storage
Appendix B (Normative Appendix) Grid Code and RFID Storage for the GS1 Global Unified Identification System
B.1 GS1 global unified identification system shelf code structure
B.2 GS1 Global Unified Identification System's shelf code for RFID storage
Appendix C (Normative Appendix) GS1 Global Unified Identification System Reader Code and RFID Storage
C.1 GS1 Global Unified Identification System Reader Code Structure
C.2 GS1 Global Unified Identification System Reader Code for RFID Storage
Reference

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the coding and identification of library books, shelves and readers' certificates, as well as the technical requirements and application fields of library radio frequency identification tags. Performance requirements and test methods.

This standard applies to the data encoding, selection, use and testing of library radio frequency identification book labels, shelf labels and reader certificates.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 1988-1998 Seven-digit coded character set for information technology information exchange

GB/T 2423.1-2008 Environmental testing of electric and electronic products - Part 2: Test methods Test A. Low temperature

GB/T 2423.2-2008 Environmental testing of electrical and electronic products - Part 2: Test methods Test B. High temperature

GB/T 7124 Determination of tensile shear strength of adhesives (rigid materials to rigid materials)

GB 12904 commodity barcode retail commodity code and barcode representation

GB/T 14916 identification card physical characteristics

GB/T 14258 Information technology automatic identification and data acquisition technology bar code symbol printing quality inspection

GB/T 16830-2008 commodity bar code storage and packaging goods and bar code representation

GB/T 17554.1-2006 Test methods for identification cards - Part 1

GB/T 17554.7-2010 Test methods for identification cards - Part 7: Proximity cards

GB/T 23704 2D barcode symbol printing quality inspection

GB/T 23832 commodity bar code service relationship coding and bar code representation

GB/T 23833 commodity bar code asset code and bar code representation

GB/T 26228.1 Information technology - Automatic identification and data-collection technology - Bar code detector conformance specification - Part 1: Bar code

GB/T 35660.1 Information and Documentation Libraries Radio Frequency Identification (RFID) Part 1: General guide to data elements and implementation

GB/T 35660.2 Information and Documentation Libraries Radio Frequency Identification (RFID) Part 2: Based on ISO /IEC 15962 RFID data element coding

HG/T 2406-2014 Universal Pressure Sensitive Adhesive Label

ISO/IEC 15426-2 Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification - Part 2: Two-dimensional symbols

ISO/IEC 18000-3 Information technology - Radio frequency identification for item management - Part 3: Parameters for air interface communications at 13.56 MHz

ISO/IEC 18000-63 Information technology - Radio frequency identification for item management - Part 63: Type C 860 MHz to 960 MHz air interface communication parameters

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.

Referenced standards

Normative references

ISO/IEC 15426-2 · ISO/IEC 18000-3 · ISO/IEC 18000-63

Similar standards

GB/T 18805-2026|GB/T 32915-2026|GB/T 42382.2-2026|GB/T 42382.3-2026|GB/T 47277-2026|GB/T 47312-2026

How to Download GB/T 37058-2018

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.