GB/T 35660.1-2017Information and documentation -- RFID in libraries -- Part 1: Data elements and general guidelines for implementation (English PDF)

Foreword

GB/T 35660 "Information and Literature Library Radio Frequency Identification (RFID)" is divided into three parts.

--- Part 1. General guidelines for data elements and implementation;

--- Part 2. RFID data element coding based on ISO/IEC 15962 rules;

--- Part 3. Data Element Encoding Based on ISO/IEC 15962 Rules in Partitioned Storage RFID Tags.

This part is the first part of GB/T 35660.

This section was drafted in accordance with the rules given in GB/T 1.1-2009.

This section adopts the redrafted law to modify the use of ISO 28560-1:2014 "Information and Literature Library Radio Frequency Identification (RFID) No. 1 Part. Data Elements and General Guidelines for Implementation.

The technical differences between this part and ISO 28560-1:2014 and the reasons are as follows.

--- Increased to meet the "card, library equipment and other single management" content (see Chapter 1).

--- With regard to normative references, this section made technical differences in order to adapt to China's technical conditions, the original international standards the standards listed in the references are actually adjusted according to the references in this section. The adjustments are reflected in the chapter 2 "Regulations".

In the "Citizen References", the following normative references are supplemented by the following standards. The specific adjustments are as follows.

- Replace GB/T 2659 with the international standard instead of ISO 3166-1;

- Use GB/T 19688 (all parts) instead of ISO 8549 (all parts);

- Added reference to ISO 15511 (see 4.2.3).

--- This section follows the principles given in ISO 15511 and formulates Chinese books in the absence of corresponding national standards.

The establishment of logos for museum industry and related organizations, and follow these two standard system architectures and regional autonomous parameter selection rules Then, formulate a code plan for the institutions in China's regions, and give details in the 4.2.3 Institutional Code (ISIL).

rule.

---4.2.8 Corresponding MARC media format data elements may be selected from MARC media formats selected in various regions of the world (e.g.

CNMARC).

--- Added "standard implementation (Chapter 11)".

This section made the following editorial changes.

--- Added "Reference to ISO 15511:2009 ISIL Library and Related International Standards Identifiers" (see Appendix F).

Introduction

The library is using radio frequency identification (RFID) technology instead of bar code technology for library identification and for reader self-service, security Guaranteed document processing flow. Using standard data models to encode information in RFID tags can improve library technology investment the benefits of capital, especially through the increased interoperability of RFID tags and devices, can enhance resource sharing among libraries.

In the library's RFID standardization work, the Nordic National Library carried out research earlier, among which Denmark released the "Library RFID Number According to the model, the attention of the industry has caused the data model to be characterized by fixed-length coding. Later, Australia proposed a variable-length coding data model.

case. During this period, libraries in countries around the world have installed different systems. These systems are provided by different technologies and library systems.

Suppliers are provided. All of these constitute the basis for establishing an RFID system, but they also account for only a small part of the global library.

Through understanding the experience of national standard programs and supplier solutions, ISO Collaborative Library Organization jointly issued ISO 28560 List standards and provide data migration options for libraries that have completed technology introduction.

The labels used by the early libraries follow the distributor's own rules or comply with their original national RFID models.

Next, this type of tag uses a data model that is incompatible with ISO 28560, and there is no interoperability with the tags of the ISO 28560 data model.

Sex. In the library's RFID system introduced after the release of the ISO 28560 standard, the tags are compatible with the ISO 28560 data model and are mutually compatible.

The operability is greatly improved.

The purpose of adopting ISO 28560 to develop GB/T 35660 is to provide a set of international standards for Chinese libraries and related organizations.

The National Library of Libraries complies with national standards for RFID technology application standards.

This section regulates data elements and provides a general guide to implementation. Part 2 describes coding and frequency selection, and part 3 gives bands Partition memory RFID tag data element encoding scheme.

The exchange of data between RFID readers and library systems generally follows a common exchange protocol, such as SIP-2 and NCIP.

(See References).

This section can be used to implement the Chinese Regional Library of ISO/IEC 18000-3 Mode 1 and ISO/IEC 18000-63 Communication Protocols and related industry organizations.

It is not recommended that users use ISO 28560-3 in the Chinese region, but in practice, users should implement ISO 28560-3 when standard RFID operations related to international logistics, interlibrary loan, cataloging, and data exchange, users in Chinese jurisdictions can use ISO 28560-3 the standard function data terminal processes related jobs.

The correspondence between GB/T 35660 and ISO 28560 is as follows.

--- Part 1 modified using ISO 28560-1:2014;

--- Part 2 modified to adopt ISO 28560-2:2014;

--- Part 3 was modified using ISO 28560-4:2014.

Information and Literature Library Radio Frequency Identification (RFID) Part 1. General Guidelines for Data Elements and Implementation

1 Scope

This part of GB/T 35660 specifies applicable to all types of libraries, including national libraries, academic libraries, public libraries, Library, specialty library, and school library collection RFID tag usage model.

The framework provided in this section is to ensure interoperability between libraries that exchange RFID-tagged collections to ensure that the library is different.

The supplier purchases or updates the autonomy of the device, as well as the interoperability of a single RFID application from the supplier's point of view.

This section specifies a set of data elements and general guidance for implementation to meet the following requirements.

--- Collection circulation;

--- Collection interviews;

---Inter-library loan;

--- The data needs of publishers, printers, and other suppliers providing library collections;

--- Inventory of inventory and inventory check;

--- Cards, library equipment and other single management.

This section gives guidance on the security of collections, details, privacy, implementation, migration, label design, and location of RFID tags.

This section specifies the data model, system data elements, user data elements, and Part 2 and Part 3 of GB/T 35660, Use together with ISO 28560-3. Additional sources of information on implementation issues can be found in Appendix A.

2 Normative references

The following documents are mandatory for the application of this document. For dated references, only dated versions apply to this document.

For undated references, the latest version (including all amendments) applies to this document.

GB/T 2659 National and regional name codes (GB/T 2659-2000, ISO 3166-1:1997, eqv) GB/T 19688 (all parts) Information and Documentation Catalogue Metadata Catalog [ISO 8549 (All Parts)] GB/T 35660.2 Information and Documentation Library Radio Frequency Identification (RFID) Part 2. Rules based on ISO/IEC 15962 RFID data element encoding (GB/T 35660.2-2017, ISO 28560-2:2014, MOD) ISO 10957 Information and Documentation International Standard Music Code [Information and documentation-International Standardmusicnumber(ISMN)] ISO 15511 International Standardization Identifier for Libraries and Related Organizations [Information and documentation-International Standardidentifierforlibrariesandrelatedorganizations(ISIL)] ISO 28560-3 Information and Documentation Library RFID Part 3. Fixed Length Coding Scheme (Informationanddocu-mentation-RFIDinlibraries-Part 3: Fixedlengthencoding) ISO/IEC 15961-3 Information Technology Article Management Radio Frequency Identification (RFID). Data Protocols - Part 3. RFID Data Structures [Informationtechnology-Radiofrequencyidentification(RFID)foritem management.Dataproto-col-Part 3: RFIDdataconstructs]

3 Terms and Definitions

The following terms and definitions apply to this document.