GB/T 35660.3-2021Information and documentation - RFID in libraries - Part 3: Encoding of data elements based on rules from ISO/IEC 15962 in an RFID tag with partitioned memory (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"

Drafting.

This document is Part 3 of GB/T 35660.GB/T 35660 has released the following parts.

---Part 1.Data elements and general guidelines for implementation;

---Part 2.RFID data element coding based on ISO /IEC 15962 rules;

---Part 3.Partition storage of data element coding in RFID tags based on ISO /IEC 15962 rules.

The revision of this document adopts ISO /T S28560-4.2014, RFID in Information and Documentation Library Part 4.RFID Labels in Districts.

The data element coding based on ISO /IEC 15962 rules was signed, and the file type was adjusted from ISO technical specifications to my country's national standards.

Compared with ISO /T S28560-4.2014, this document has made the following structural adjustments.

--- Chapter 6 adds the number 6.2.1, 6.2.2~6.2.5 corresponds to 6.2.1~6.2.4 of ISO /T S28560-4.2014; added

The number of 6.2.4.1, 6.2.4.2~6.2.4.3 corresponds to 6.2.3.1~6.2.3.2 of ISO /T S28560-4.2014;

---Chapter 7 adds the number of 7.3.5.1, 7.3.5.2~7.3.5.4 corresponds to 7.3.5.1~7.3.5.3 of ISO /T S28560-4.2014, added

Added the number 7.3.11.1, 7.3.11.2~7.3.11.8 corresponds to 7.3.11.1~7.3.11.7 of ISO /T S28560-4.2014;

--- Chapter 9 adds the number of 9.2.3.1, 9.2.3.2~9.2.3.5 corresponds to ISO /T S28560-4.2014's 9.2.3.1~9.2.3.4;

---Appendix D adds the number of D.2.1, D.2.2~D.2.4 corresponds to D.2.1~D.2.3 of ISO /T S28560-4.2014;

---Appendix E adds the number of E.3.1, E.3.2~E.3.6 corresponds to ISO /T S28560-4.2014 E.3.1~E.3.5, compliant

E.3.4.1~E.3.4.5 correspond to E.3.3.1~E.3.3.5 of ISO /T S28560-4.2014.

The technical differences between this document and ISO /T S28560-4.2014 and the reasons are as follows.

--- Regarding normative reference documents, this document has been adjusted for technical differences to adapt to my country's technical conditions, and the adjustments are concentratedly reflected

In Chapter 2 "Normative Reference Documents", the specific adjustments are as follows

* Replace ISO /IEC 10646 with GB 13000 equivalent to the international standard (see 7.3.11.3 Table 7 and D.2.3);

* Replace ISO /IEC 8859-1 with GB 15273.1 equivalent to the international standard (see 6.1 Table 1, 6.2.1, 6.17, 6.18,

Introduction

Libraries are using radio frequency identification (RFID) technology to replace bar code technology for collection identification, and apply it to reader self-service and security

And the literature is being processed. Using standard data models to encode information in RFID tags can improve the efficiency of library technology investment

Benefits, especially by improving the interoperability between RFID tags and equipment, can enhance resource sharing between libraries.

Through understanding of the experience of national standard programs and supplier solutions, the ISO collaborative library organization jointly released the ISO 28560 series.

Column standards. Among them, ISO 28560-1 defines mandatory and optional data elements, and ISO 28560-2 and ISO 28560-3 define work

There are two coding schemes for RFID tags with a frequency of 13.56MHz for libraries to choose from. ISO TS28560-4 defines the frequency in

Encoding scheme for RFID tags from 860MHz to 960MHz.

GB/T 35660 aims to establish a relatively complete set of standardized data encoding formats suitable for the management of library radio frequency identification in my country

The system is to be composed of 3 parts.

---Part 1.Data elements and general guidelines for implementation. Provides radio frequency identification for collections required by various types of libraries

(RFID) Tag usage model.

---Part 2.RFID data element coding based on ISO /IEC 15962 rules. Provides for various types of libraries

The required data model and coding rules for the collection of radio frequency identification (RFID) tags.

---Part 3.Partition storage of data element coding in RFID tags based on ISO /IEC 15962 rules. For operating frequency

Data coding scheme developed based on the storage structure of UHF RFID tags at 860MHz-960MHz. Corresponding RFID reading

The reader is set to comply with local radio regulations. This document is the same as GB/T 35660.2, adopting ISO /IEC 15962 rules

coding.

This document aims to standardize the coding of data elements in RFID tags stored in partitions based on ISO /IEC 15962 rules.

Information and Literature Library Radio Frequency Identification (RFID)

Part 3.Partition storage of RFID tags based on

Data element coding according to ISO /IEC 15962 rules

1 Scope

This document defines the coding rules of data elements in GB/T 35660.1 in RFID tags with 4 partitions storage structure.

Mainly for UHF RFID tags that comply with ISO /IEC 18000-63 (ISO /IEC 18000-6 Type C), but not limited to this type of technology

The label of the technique.

For the subset of data elements extracted from GB/T 35660.1, the coding rules follow the requirements of ISO /IEC 15962, that is, the

Like the identifier structure to identify the encoding method of the data element. Taking into account different privacy requirements, this document defines a unique collection

Set storage area 01, which is the encoding rule in MB01, and also define other related data elements in another independent storage area 11, namely

Encoding rules in MB11.Each storage area can be operated by different addressing instructions of the corresponding RFID technology.

This document satisfies various types of libraries (such as national libraries, academic libraries, public libraries, corporate libraries, professional libraries, academic libraries, etc.).

School library, etc.) apply RFID technology management needs.

This document provides standards-based necessary information about the application of RFID in libraries. For additional information about the implementation, please refer to the attachment.

Record A.

2 Normative references

The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations

Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to

This document.

GB/T 1988 Seven-bit coded character set for information technology information exchange (GB/T 1988-1998, ISO /IEC 646.1991,

eqv)

GB/T 5795 Chinese Standard Book Number

GB 12904 commodity barcode retail commodity coding and barcode representation

GB/T 12906 Chinese Standard Book Number Barcode

GB/T 13000 Information Technology Universal Multi-octet Coded Character Set (UCS) (GB/T 13000-2010, ISO /IEC 10646.

2003, IDT)

GB/T 15273.1 Information Processing Eight-bit Single-Byte Coded Graphic Character Set Part 1.Latin Alphabet One (GB/T 15273.1-

1994, ISO /IEC 8859-1.1987, idt)

GB/T 16827 Chinese Standard Serial Number (ISSN Part) Barcode

GB/T 35660.1 Information and Literature Library Radio Frequency Identification (RFID) Part 1.Data Elements and General Guidelines for Implementation

(GB/T 35660.1-2017, ISO 28560-1.2014, MOD)

GB/T 35660.2 Information and Literature Library Radio Frequency Identification (RFID) Part 2.Based on ISO /IEC 15962 rules

RFID data element coding (GB/T 35660.2-2017, ISO 28560-2.2014, MOD)

ISO 15511 Information and documentation libraries and related organizations' international standard identification [Informationanddocumentation-

Internationalstandardidentifierforlibrariesandrelatedorganizations(ISIL)]