HG/T 2406-2014General purpose pressure-sensitive adhesive labels (English PDF)
通用型压敏胶标签
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2406-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 12, 2014
Implementation date
October 1, 2014
Scope
HG/T 2406-2014 is the English-translated version of 通用型压敏胶标签.
HG/T 2406-2014 is the Chinese chemical industry standard for general purpose pressure-sensitive adhesive labels. It first classifies these labels and then sets out their technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage.
Its scope takes in the range of paper and film label materials made for general use. The checks are carried out with the standards it quotes, among them GB/T 450, GB/T 2792-1998, GB/T 4851-1998, GB/T 7125-1999, GB/T 22396 and HG/T 4139.
It replaces the 2002 edition, HG/T 2406-2002. Issued on 12 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — HG/T 2406-2014
National Standard of the People's Republic of China
- ICS
- 83.180
- Replacing
- HG/T 2406-2002
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 2406-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 12 May 2014 and has been in force since 1 October 2014.
It replaces the earlier edition HG/T 2406-2002, HG/T 2406-1992.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the Chinese chemical industry standard for general purpose pressure-sensitive adhesive labels. It first classifies these labels and then sets out their technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage. Its scope takes in the range of paper and film label materials made for general use. The checks are carried out with the standards it quotes, among them GB/T 450, GB/T 2792-1998, GB/T 4851-1998, GB/T 7125-1999, GB/T 22396 and HG/T 4139. It replaces the 2002 edition, HG/T 2406-2002.
HG/T 2406-2014 falls under ICS 83.180, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 450
GB/T 451.1-1989 — Paper and board--Determination of size and deviation
GB/T 2792-1998 — Test method for peel strength of pressure-sensitive tape at 180 Degree angle
GB/T 4851-1998 — Test method for holding power of pressure sensitive adhesive tapes
GB/T 4852
GB/T 7125-1999 — Test method for thickness of pressure-Sensitive and gummed tapes
GB/T 22396
HG/T 4139
SN/T 2003.1-2005 — Determination of lead, mercury, cadmium, chromium, and bromine in the electrical and electronic products - Part 1: X-ray fluorescence spectroscopy qualitative screening method
4 Where this standard sits
It cites 9 standards, among them GB/T 451.1-1989, GB/T 2792-1998, GB/T 4851-1998, listed in full above.
2 other standards in this catalogue cite it, among them GB/T 37026-2018, GB/T 37058-2018.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other editions:
HG/T 2406-2002 (earlier edition)
HG/T 2406-1992 (earlier edition)
Standards on related subjects:
GB/T 14732-2017 — Wood adhesives: urea-formaldehyde, phenol-formaldehyde and melamine-formaldehyde resins
GB/T 33320-2016 — Adhesives in food packaging materials and containers
HG/T 6532-2026 — Seam Sealant for automobile
HG/T 3698-2026 — EVA hot-melt adhesives
HG/T 3948-2025 — Hot-melt adhesives for sanitary products
7 Classification and status
International classification (ICS): 83.180
Chinese Standard Classification (CCS): G 39
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 450Paper and board -- Sampling for testing and identification of machine and cross direction, wire side and felt side
- GB/T 451.1-1989Paper and board--Determination of size and deviation
- GB/T 2792-1998Measurement of peel adhesion properties for adhesive tapes
- GB/T 4851-1998Measurement of static shear adhesion for adhesive types
- GB/T 4852Test method for tack of pressure sensitive adhesive tapes by rolling ball
- GB/T 7125-1999Test method for thickness of adhesive tapes
Similar standards
Editions of HG/T 2406
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2406-2014 | General purpose pressure-sensitive adhesive labels | current edition | Current |
| HG/T 2406-2002 | General purpose pressure-sensitive adhesive labels | previous edition | Superseded |
This page sells the current edition, HG/T 2406-2014. Earlier editions are listed for reference only.
How to Download HG/T 2406-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 22396-2008 — Terminology relating to pressure sensitive adhesive products
GB/T 22396-2026 — Terminology for pressure sensitive adhesive products
GB/T 2792-1998 — Test method for peel strength of pressure-sensitive tape at 180 Degree angle
HG/T 2406-2014
$105.00