GB/T 36728-2018Classified criteria for theater performance safety (English PDF)
剧院演出安全等级分类
This is a limited preview
Buy now to download the full PDF (24 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36728-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 17, 2018
Implementation date
April 1, 2019
Scope
GB/T 36728-2018 is the English-translated version of 剧院演出安全等级分类.
GB/T 36728-2018 sets out how to classify the safety of performances in theatres.
Building on GB/T 36729, it defines performance safety, personal and property safety and the risk index, and gives the method of safety rating: identifying first and second type hazards, grading accidents by severity, assigning five protection levels, classifying hidden dangers and assessing a risk index from probability and severity.
From these it derives the safety level of a theatre and of a repertory performance, with emergency plans, rectification and shutdown as continuous improvement steps.
An annex works through a complete performance risk assessment as an example. Theatres, performing companies and industry associations use it; temporary stages in squares, stadiums, malls, parks and similar places are excluded. It was issued on 17 September 2018 and has applied since 1 April 2019.
Found what you need?
Document preview — GB/T 36728-2018
National Standard of the People's Republic of China
- ICS
- 13.100
- Classification
- Y 09
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 General
- 4.1 Scope of safety rating
- 4.2 Method of safety rating
- 5 Hazard identification
- 5.1 Hazard identification method
- 5.2 Type 1 hazard identification
- 5.3 Type 2 hazard identification
- 6 Accident Rating Category
- 6.1 Special major accidents
- 6.2 Major accidents
- 6.3 Extraordinary casualties
- 6.4 Major casualties
- 6.5 Serious accident or serious accident
- 6.6 minor accident or (general) accident
- 7 Protection class classification
- 7.1 Primary protection
- 7.2 Secondary protection
- 7.3 Three-level protection
- 7.4 Level 4 protection
- 7.5 Five-level protection
- 8 Hazard Category
- 8.1 General provisions
- 8.2 Violation of the hidden dangers
- 8.3 injury accident
- 8.4 serious injury
- 8.5 Casualties
- 8.6 Extraordinary accident
- 9 Risk Index Assessment
- 9.1 Performance Risk Estimate
- 9.2 Risk Index Assessment
- 10 performance security level classification
- 10.1 General Provisions
- 10.2 Performance Security Level Classification
- 10.3 Theater Performance Security Level Classification
- 10.4 Repertory Performance Security Level Classification
- 11 Continuous Improvement and Evaluation Example
- 11.1 Emergency Plan
- 11.2 Comprehensive rectification
- 11.3 Shutdown and rectification
- 11.4 Evaluation Example
- Appendix A (informative) Performance safety risk assessment (example)
- Reference
Foreword
This standard and GB/T 36729 "Performance Safety", GB 36726 "stage mechanical rigid fire isolation curtain", GB/T 36731 "temporary ride The stage for the establishment of performance venues and the safety of the stands will constitute the safety standard system for performances in China.
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Introduction
In order to enable the theater and performance groups to scientifically judge the safety level of the performance, eliminate hidden dangers and avoid accidents in time, according to GB/T 36729 "Safety of Performance" on the safety of performances, the application of safety management scientific theory, combined with the hidden dangers and possible problems in the performance process Accidents, as well as the severity of accidents, this standard gives a method for judging the classification of safety levels and the degree of danger, providing assessment safety, etc.
Level reference case. GB/T 36729 "Performance Safety" is the basic standard of this standard, and this standard is regarded as the certification standard is GB/T 36729 The application practice of the "Safety of Performance" standard.
The Chinese performance safety standard system has been formed. From the form of the performance venue, the theater performance safety and temporary performance venues have been standardized.
Safe; from the functional structure of the theater, GB 36726 "stage mechanical rigid fire isolation screen" regulates the safety of the stage side and the auditorium, The safety of the stage system and the safety of the theater building are regulated by GB/T 36729 "Safety of Performance"; for the safety of the stage system, according to the stage science and technology Department, standardizes all stage professional system security. At the same time, technical aspects related to performances were formulated from the perspectives of technology, organization and occupation.
Full requirements, management practices and operating procedures. The establishment of China's performance safety standard system is the development of the national theater performance safety classification Set the foundation and highlight the necessity of comprehensively promoting the institutionalization of theater security.
In order to make the safety management of performances become the regular content of theater management, this standard will adopt the performance risk assessment rules commonly used in the world.
The assessment method is applied to the theater safety hazard assessment and safety management methods, and the classification of theater performance safety levels is formulated. A guide to the classification of theater security levels.
1 Scope
This standard establishes the general classification of performance accident classification, safety protection classification, hidden danger classification and performance safety classification.
Then, specific measures and methods for safety rating, hazard identification, performance risk assessment, and continuous improvement are specified.
This standard applies to the performance evaluation of the theater management and performance parties, as well as to industry associations, society to perform industry performance safety, etc. Rating.
This standard does not apply to temporary construction of stage, live performances, etc. in squares, stadiums, exhibition halls, shopping malls, hotels, factories, parks, scenic spots, etc. Type of performance safety rating.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 6441-1986 Classification of enterprise employee casualties
GB/T 28001 Occupational Health and Safety Management System Requirements
GB/T 28002-2011 Occupational Health and Safety Management System Implementation Guide
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Performance (activity)
Theatrical performance; art performance
The whole process of stage art performances in the performance venue includes transportation, assembly, rehearsal, performance, and demolition.
Note: The performance is a process, including the disassembly of the stage after the installation, rehearsal, performance and performance. The starting point of the performance from the performance equipment to the stage is the starting point of the installation.
After the equipment is disassembled, the stage is left as the end point. The show is a complete event of a series of events, including pre-show events, events during the show.
And activities after the show. The performance is a whole process activity around the stage art performance, and it is a life cycle activity from beginning to end.
3.2 Performance safety
Ensure that the show is free of unacceptable risks.
3.3 Personal safety
A state in which people's lives and health are protected from harm.
Note: "Health" includes physical and mental health.
3.4 Property security
Ensure that the property is not damaged.
3.5 Risk index; performance risk
A comprehensive measure of an accident during a performance, including the probability of an accident and the severity of the accident.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.
Referenced standards
Normative references
GB/T 28001 · GB/T 28002-2011
Similar standards
How to Download GB/T 36728-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6441-1986 — Classification and coding of work safety accidents
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 36728-2018
$415.00