Valid

GB/T 36727-2018Stage machinery－Specification for acceptance test (English PDF)

舞台机械验收检测规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (19 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36727-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 17, 2018

Implementation date

April 1, 2019

Scope

GB/T 36727-2018 is the English-translated version of 舞台机械验收检测规范.

GB/T 36727-2018 is the Chinese national specification for acceptance testing of stage machinery and equipment before it is put into use.

It lists the acceptance test items and methods, from the preliminary inspection and the check of equipment arrangement and structure to the acceptance tests themselves, and explains how results are judged and a test conclusion is reached.

It also covers how testing is carried out: the test outline, the testing organization and equipment, the number of devices tested, the test sequence, and the test record and report.

Annexes detail the test items and methods and give a report format, and a review is defined as the re-test of failed items after rectification. General principles are also set for regular inspection and retrofit testing. It was issued on 17 September 2018 and has applied since 1 April 2019.

Found what you need?

Document preview — GB/T 36727-2018

National Standard of the People's Republic of China

ICS: 21.020
Classification: J 09

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 Terms and Definitions
4 Acceptance test content and method
4.1 Acceptance test items and methods
4.2 Preliminary inspection
4.3 Equipment Process Arrangement and Structure Inspection
4.4 Acceptance test
5 result judgment
5.1 Judgment Principle
5.2 Test conclusion
6 Implementation of acceptance testing
6.1 Test Outline
6.2 Testing organization
6.3 Testing equipment
6.4 Number of devices tested
6.5 Detection sequence
6.6 Test record
6.7 Test report
6.8 Recording and reporting of records
7 Regular inspection
8 transformation test
Appendix A (Normative Appendix) Acceptance Test Items and Methods
Appendix B (informative appendix) Stage Machinery Acceptance Test Report (Format)
Reference

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the implementation of the stage machinery acceptance test content and methods, results determination and acceptance testing. This standard establishes regular inspections General principles for testing and retrofitting testing.

This standard applies to the acceptance testing of stage machinery and equipment.

Regular inspection and modification testing of stage machinery and equipment can be carried out with reference to the relevant content of this standard.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB 5226.1-2008 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions

GB/T 15543-2008 Power quality three-phase voltage imbalance

GB/T 17248.1 Noise emitted by acoustic machines and equipment Determination of the position of the sound pressure level at the working position and other specified locations Basic standard use guidelines

GB/T 17248.2 Measurement of sound pressure levels emitted by acoustic machines and equipment and other specified positions An engineering method for approximating the free field above a reflecting surface

GB/T 17248.3 Measurement of sound pressure levels emitted by acoustic machines and equipment and other specified positions Simple method on site

GB/T 17248.4 Noise emitted by acoustic machines and equipment is determined by the sound power level at the working position and at other specified locations. Sound pressure level

GB/T 17248.5 Measurement of sound pressure levels emitted by acoustic machines and equipment and other specified positions Environmental amendment

GB/T 21671-2008 LAN system acceptance test evaluation specification based on Ethernet technology

GB/T 50312-2016 Integrated wiring system engineering acceptance specification

JGJ57-2016 Theater Architecture Design Code

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Acceptance test

Technical testing of new stage machinery and equipment before it is put into use.

3.2 Review

Stage mechanical equipment and engineering have unqualified items in the testing process, and the unqualified items are re-tested after the rectification is completed.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.

Referenced standards

Normative references

GB 5226.1-2008 · GB/T 17248.4 · JGJ57-2016

Cited by

GB/T 45229-2025Requirements for safety of theatre process

Similar standards

GB/T 10091.1-2025|GB/T 46238-2025|GB 36726-2018|GB/T 17889.7-2026|GB/T 17889.5-2025|GB/T 17889.6-2025

How to Download GB/T 36727-2018

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.